feat(subscription): RFID enrollment, any-credential exit, prepaid booth handling

Rounds out subscriptions across enrollment, the barrier flow, and the booth.

- RFID credentials enabled with a "Read card" enrollment flow: the operator
  arms ONE chosen reader (CredentialCapture, single-shot + ~30s TTL); that
  reader's next read is captured into the form and NOT dispatched to the access
  flow — the OTHER reader keeps serving live entry/exit. Routes:
  /api/subscriptions/readers + /capture/{arm,cancel} + poll.
- Enter with one credential, exit with another: sessions are keyed by a
  per-occurrence id (SUBSESS-<short>), not the credential value, with
  permitId in the payload. Direction is decided by the barrier the reader sits
  at (entry-lane→entry, exit-lane→exit; "both" infers); a fleet (maxConcurrent>1)
  admits several cars and exits any with any credential, FIFO (oldest first).
- Booth treats a subscription occurrence as PREPAID: never quoted/charged; the
  pay/exit modal shows a subscription mode (snapshots + a single audited
  Open-barrier action) to assist a faulty exit reader / missing card;
  reopenBarrier authorizes paidAt!=null OR subscription. Active Sessions badges
  "abonim" and labels by holder name (not the raw key).
- Plus a per-read diagnostic log in the QR-reader route (serial → device →
  verdict/dir), which surfaced the earlier duplicate-reader-IP misroute.

Verified via buildServer+inject + reader-scan/TCP-capture simulations
(enrollment isolation, cross-credential + FIFO fleet, prepaid-not-charged,
subscription reopen, unpaid-transient guard). Updated wiki (subscription,
booth-exit-flow). No migration.

Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V

wiki/log.md

@@ -832,3 +832,15 @@ QR credentials are now AUTO-GENERATED server-side (`SUB-<15×base32>`, crypto-ra
 ## [2026-06-18] feat | Subscription QR card — printed on creation + reprint, real QR rendering
 
 The auto-generated subscription QR is now PRINTED so the operator can hand it to the customer. Added real 2D QR rendering to the [[rongta-printer]] driver via ESC/POS `GS ( k` (model 2, EC level M; firmware-rendered, no bitmap dep) — new `PrinterDevice.printSubscriptionCard(SubscriptionCardData)`; the card is park header → scannable QR of the code → code text (hand-key fallback) → holder + validity. Server: `printSubscriptionCard()` in booth-print.ts (booth-receipt printer, failover to dispenser); create AUTO-PRINTS best-effort (a print failure never fails the create — response returns `{printed, printError}`); new `POST /api/subscriptions/:id/print` reprint (operator-or-admin; 409 if no QR credential, 503 if no printer). Web: SubscriptionManager surfaces the print outcome on save and a "Print code" button per QR subscription; api types + i18n (sq/en). Verified on the wire via buildServer+inject + a TCP capture (9/9: auto-print, well-formed GS ( k QR bytes with the embedded code, reprint re-sends, no-QR→409). Updated [[subscription]] + [[rongta-printer]]. No migration.
+
+## [2026-06-18] feat | Subscription RFID enrollment — "Read card" capture on a chosen reader
+
+Enabled RFID subscription credentials with a card-enrollment flow. The operator picks a reader and presents the physical card; the value is captured into the credential instead of being typed. New in-memory `CredentialCapture` (single-shot + ~30s TTL): `arm(deviceId)`; `routes/qr-reader.ts` checks `tryConsume()` on each read — an armed reader's read is captured and NOT dispatched (no barrier for an enrolled card), then auto-disarms; reads on the OTHER reader dispatch normally, so its live entry/exit flow is never blocked. Routes (operator/admin): `GET /api/subscriptions/readers` (picker), `POST /capture/arm`, `GET /capture` (poll: idle|armed|captured|expired), `POST /capture/cancel`. Web: RFID re-enabled in the form (was disabled "soon"); "Read card" → reader picker → arm → poll → fills the value; i18n (sq/en). The GEE readers are combo QR+RFID (ID/IC/NFC), same endpoint, so one device captures both. Verified via buildServer+inject + reader-scan simulation (12/12: captured-not-dispatched, single-shot, other reader still drives a live vehicle_exit while armed, value retrievable, cancel). Updated [[subscription]]. No migration.
+
+## [2026-06-18] feat | Subscriptions — enter with one credential, exit with another (+ FIFO fleets)
+
+Decoupled subscription exit from the entry credential. Previously the session was keyed by the exact credential value read (an accidental coupling → must exit with the same QR/RFID you entered with). Now sessions are keyed by a per-occurrence id (`SUBSESS-<subId>-<uuid>`, the ledger `identity`; `payload.permitId`=subId), so ANY of a subscription's credentials (QR/RFID/NFC/plate) opens or closes. Direction is now decided by the BARRIER the reader sits at (entry-lane→entry, exit-lane→exit; a "both" barrier infers from open state) — this lets a FLEET (maxConcurrent>1) admit several cars (each entry-lane read is an entry) yet exit any of them with any credential; exit closes the OLDEST open occurrence (FIFO). Per-car identity within a fleet isn't tracked (never was once credentials are shared). `#openOccurrences()` replaced `#carHasOpenSession`/`#subscriptionOpenCount`. Exit with nothing open → signed anomaly (anti-passback). Verified 11/11 (enter-QR/exit-RFID + reverse, fleet 2-in mixed-credential FIFO out, capacity, anti-passback, chain intact). Updated [[subscription]] (multi-credential + entry-decoupled-from-exit). No migration.
+
+## [2026-06-18] fix | Subscription occurrences in the booth — prepaid, barrier-open assist (not transient)
+
+A subscription occurrence (SUBSESS-…) showed in Active Sessions but was wrongly treated as an unpaid transient: the modal tried to quote/charge it and the "open barrier" button only appeared for PAID sessions, so a subscriber with a faulty exit reader / missing card couldn't be assisted. Fix: `pay-station.ts` lookup/activeSessions now flag `subscription`/`subscriptionId`/`subscriptionHolder` from the entry payload (permit:true/permitId) and DON'T quote a subscription (amountMinor null). `exit-flow.ts` reopenBarrier now authorizes `paidAt != null || subscription` (prepaid). UI: the pay modal renders a SUBSCRIPTION mode (PREPAID badge, snapshots, single Open-barrier action, no tender/voucher) and the active row badges "abonim" + shows the holder name; both labelled by holder, not the raw key. Also SHORTENED the occurrence id (was SUBSESS-<subId>-<uuid>, ~80 chars) to `SUBSESS-<12hex>` — the subscriptionId lives in the payload (which every fold matches on), so it needn't be embedded in the key. Verified 9/9 (subscription flagged + not charged in lookup/active, reopen works without payment, unpaid-transient guard intact). Updated [[booth-exit-flow]]. No migration.