Neither UHPPOTE nor ZKTeco is used — the Dingtian relay controller was chosen
and verified. Remove their code and re-scope the wiki.
Code:
- delete access-uhppote.ts, uhppoted.d.ts, access.ts (zkteco/esp32-relay stubs),
and the three uhppote-*.mjs hardware test scripts.
- remove the `uhppoted` npm dependency from @parking/devices and @parking/server.
- unregister uhppote/zkteco/esp32-relay from the driver registry; drop their
exports. Catalog access drivers = dingtian only. Build green (5/5).
- refresh now-stale example comments (registry/interfaces/setup/api) to use
current examples; keep the two "UHPPOTE blocker" references that explain why
the precondition capability exists.
Wiki (kept pages, re-scoped):
- uhppote-controller, zkteco-controller -> rejected/historical with callouts;
uhppote-vs-esp32 -> historical (detection-vs-prevention lens still useful).
- re-point all "current device" framing (standing-decisions, bom, overview,
open-questions, device-registry, device-discovery, index) to dingtian-relay.
- transferable concepts (network-isolation, event-log-ingestion, barrier-not-a-
door, threat-model) untouched. Raw source immutable. Links lint clean.
The Dingtian board's inputs are independent of its relays (configurable), so a
button on an input can report to the host WITHOUT auto-firing a relay — solving
the access-controller-button-flow blocker the UHPPOTE/ZKTeco couldn't.
packages/devices:
- access-dingtian.ts: `dingtian` access driver implementing AccessControlDevice
(relay pulse/latch via UDP string protocol :60001), InputDevice (read inputs +
poll-based press/release events, active-LOW), and the new PreconditionDevice.
- PreconditionDevice capability on the interface: a device can report config it
requires for parking and optionally fix it. Dingtian checks input_link_relay
via the HTTP config API and can disable it.
- httpPort config field — the web/config API port is separate from UDP control
(this unit uses 8080, not the default 80).
- Register dingtian; export driver objects from the package.
Verified on real hardware (DT-R004 @ 10.0.10.172): status read, relay pulse,
input events; disabled input_link_relay via the driver, then confirmed pressing
inputs fires NO relay (0000) — host-in-the-loop entry works.
Config-write gotcha recorded: config_set.cgi requires "command":"setconfig"
injected after "status" (GET omits it) or the POST silently no-ops.
apps/server/scripts/dingtian-test.mjs: status / watch / pulse hardware test.
wiki: dingtian-relay verified; button-flow marked RESOLVED; index + log.
Researched Node options for the UHPPOTE controller and chose the official
`uhppoted` npm package (MIT, actively maintained, single trivial dep). Its API
covers the full design: openDoor, getStatus, the event-log set (getEvent,
getEventIndex, setEventIndex, recordSpecialEvents), and setListener/listen.
Rejected alternatives: raw-dgram DIY, node-red-contrib-uhppoted, Go sidecar.
- packages/devices: add uhppoted@0.9.0; new `uhppote` access driver implementing
AccessControlDevice (pulseOpen -> openDoor intent-only; healthCheck/getDoorStatus
-> getStatus). Registered in the catalog alongside zkteco/esp32-relay.
- Local ambient types (uhppoted ships none); CJS interop via default-import +
destructure under NodeNext.
- Config fields: controller serial (required), optional host/protocol (udp|tcp),
doors, timeout.
Security/safety unchanged: unauthenticated UDP -> isolated VLAN assumed; relay
is intent-only ("a barrier is not a door").
wiki: record the library choice on uhppote-controller + log entry.
Verified: builds; `uhppote` shows in the catalog with correct fields;
instantiates and degrades to "offline" gracefully without hardware (on-VLAN
test pending).
Make the device-adapter pattern selectable so the admin chooses hardware at
install — per lane, from a catalog of supported drivers. Adding a device =
registering one more driver; no business-logic change.
packages/devices:
- interfaces.ts: AccessControlDevice / ReaderDevice / CameraDevice / PrinterDevice
(adds CameraDevice for entry/exit snapshot-on-event; access relay stays
intent-only per "a barrier is not a door").
- registry.ts: driver catalog with per-driver config fields + factory, config
validation, and a catalog payload for the setup UI.
- drivers/: stub adapters — access (zkteco, esp32-relay), reader (wiegand,
tcp-ip), camera (hikvision, dahua). Real vendor protocols TBD.
packages/db:
- lane_devices + setup_state tables (migration 0001); re-export query helpers.
apps/server:
- routes/setup.ts: GET /api/setup/catalog (public schema), and admin-only
/assign, /state, /complete with registry validation before persisting.
- extract auth.ts (requireJwtSecret, requireRole, JWT type aug).
apps/web:
- SetupWizard scaffold + api client: pick a driver per category for a lane,
render its config fields.
wiki: device-registry + first-run-setup concept pages; cross-link from
device-adapter-pattern; index + log updated.
Verified: full turbo build (5/5); catalog lists all drivers; admin assign
persists; missing-config and no-token requests are rejected.
julian