Two independent wiki updates bundled (all docs):
1. dingtian-dt008-reader.md: phantom optical decodes on the park-buzi EXIT
reader (empty pre-opening site, low-sun afternoons). Chain of evidence:
READ log lines carry the reader's own serial (H05MA5B0) → physical device,
not a network source; snapshot shows nobody present; code shapes are the
giveaway (6-digit numerics = checksum-less Interleaved 2-of-5, lone "C" =
Code39/Codabar artifact) → 1D engine decoding sun-made stripe patterns
(striped arm, fence shadows, glare). No fraud exposure (11-digit Luhn ids
can't match); noise only. Fix on the entity page: vendor-tool symbology cut
to QR+Code128 + min decode length, BOTH readers; config lives ON the device
→ re-apply after any factory reset/swap. Deliberately NOT filtering
impossible codes server-side — probe recording is the anomaly path's job.
2. Backfilled two shipped-but-undocumented features (six code files already
linked the first page as if it existed):
- concepts/entry-presence-bypass.md — admin drops a FAULTY presence signal
(granular radar/camera by decision, not a master switch); every flip is a
signed config_change; persists till off; tickets stamped presenceBypassed;
radar-bypass cooldown tradeoff; "the admin is not the adversary, but
trusted never means invisible".
- concepts/setup-relay-test.md — admin-only commissioning pulse, signed
barrier_open_command BEFORE the fire so a test open never reads as the
out-of-band-open fraud signal; saved controllers/declared relays only;
radarAlert lamps excluded; pulseOpen only.
Cross-linked from operator-issued-entry.md, cataloged in index.md, logged.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
An early wrong assumption named the QR/RFID access reader "GEE" /
"GEE/Fondvision" / "GEE-QR-ER80" (and summarized a raw GEE PDF as its
datasheet). There is no GEE device — it's the Dingtian DT-008
(dingtian-tech.com/en_us/qr_code_reader.html), the same vendor as the relay
board, which is why it integrates the identical HTTP-GET-push way.
Code:
- Driver symbol geeQrReaderDriver → dingtianQrReaderDriver; label →
"Dingtian DT-008 QR/RFID reader (HTTP push)"; comments/description rewritten
to the real DT-008 facts (Wiegand 26/34, TCP/IP, USB, RS485 — not RS-232;
QR/barcode + ID/IC/NFC — not DataMatrix/1D).
- Persisted driverId "gee-qr-reader" → "dingtian-qr-reader" (the registry
lookup key + the row created on assign in qr-reader.ts).
- Migration 0015 rewrites existing devices.driver_id rows so configured readers
keep resolving (applied to the dev DB — 2 rows; the booth applies it on boot).
Behaviour is unchanged: naming + the persisted id only.
Wiki + memory:
- Renamed entities/gee-qr-er80.md → dingtian-dt008-reader.md and
sources/gee-qr-er80.md → dingtian-dt008.md; rewrote both to the real DT-008
product-page specs while KEEPING all the verified-on-hardware protocol facts
(cjihao serial, .jsp path, Connection: close). Fixed every cross-reference +
"GEE" mention in 6 other pages. Memory gee-reader-serial-binding →
dingtian-reader-serial-binding. The only surviving "GEE" mentions are
deliberate naming-correction notes, the raw PDF filename, and the
append-only log history.
Full workspace build/lint/test green; dev DB readers verified resolving to the
registered dingtian-qr-reader driver.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
julian