A subscriber entering outside their plan's window owes a deferred charge, but
nothing printed — they had no paper proof a fee was pending. Print a best-effort
ADVISORY slip at entry ("PARKIM — JASHTË ORARIT"): holder, entry time, "entered
out-of-window (window opens HH:MM)", and the key line "⚠ fee computed at exit"
+ the occurrence number. It is NOT a payable ticket and carries NO amount — the
total is computed at the booth on settlement, combining early-entry AND any
late-exit time into one number (windowOwedBetween over the whole stay).
Best-effort like the Z-report / subscription card: printed AFTER the barrier
opens and fully swallowed, so a missing/failed printer never blocks entry. New
printWindowChargeNotice (booth-print.ts) via the generic printReport; wired into
the subscription entry flow when an out-of-window entry charge applies.
(The "both charges at the booth" requirement was already satisfied by the
windowOwedBetween fix — verified: early-entry + late-exit minutes combine in one
calc at lookup/exit. This commit only adds the entry paper trail.) Build+lint 12/12.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The exit-gate refusal for an unpaid out-of-window subscriber charge rendered as
the raw code `reason.sub.refused.unpaidWindow` — the code + English fallback
existed in @parking/shared but the reason.* catalogs had no entry. Add it to
both catalogs with the {{amount}}/{{currency}} params the gate passes.
EN: "Exit refused — out-of-window charge unpaid ({{amount}} {{currency}}); pay at the booth"
SQ: "Dalja u refuzua — detyrim jashtë orarit i papaguar ({{amount}} {{currency}}); paguaje në kabinë"
Build+lint 12/12 (i18n parity).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The tariff-bridge owed amount summed TWO charges — the early-entry gap +
a "late-exit" gap — and the exit gap (outOfWindowGap edge:"exit") always
measured back to the PREVIOUS window close, even for a subscriber still BEFORE
their window. So a car that entered ~30 min early showed ~12h owed (4,100 ALL)
the moment it was looked up, instead of ~100 ALL.
Replace the two-gap sum with a single correct primitive,
minutesOutsideWindow(timeframes, tz, from, to): the minutes within the actual
stay [entry, now] that fall outside the allowed window (covering early entry AND
late exit, bounded by the stay, weekend/off-days free). windowOwedBetween prices
those minutes once as a transient stay (so increments + daily cap apply) against
the tariff in force at entry. Both the exit gate (subscription-flow) and the
booth quote (pay-station) now use this one source of truth — they can't disagree.
Verified on the live occurrence: was 4,100 ALL, now 100 ALL (9 min outside →
one increment). 87 shared tests (6 new regression cases incl. the phantom span).
Build+lint 12/12.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
A subscriber entering outside their plan's allowed window gets a deferred
transient charge (windowOwedMinor, collected/gated at exit) — but it was
SILENT at the booth: the entry showed as a plain subscriber pass with no hint
money is owed, so the operator only discovers it at exit.
Surface it: add a "out-of-window — owes fee" badge on any entry/exit event
carrying windowOwedMinor > 0, so the operator sees immediately that this
subscriber owes a fee. Also type the window-charge fields on LedgerPayload
(were riding the open-ended index signature).
Behaviour is otherwise unchanged and correct — verified the live "Mon Kukaleshi"
entry: entered 20:29 local (before the 21:00 Mon–Sat window, grace 5m), owes
100 ALL for 18:29–18:55Z, stamped on the signed entry, still owed, gated at
exit. Subscribers get no ticket by design. Build+lint 12/12.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Addresses three issues with the plan catalog screen:
1. Retired plans had NO actions (the action cell was gated on "current
version", which a retired plan lacks) — so there was no way to make one
in-force again. Add POST /:planId/reactivate (inverse of retire) + a
Reactivate button on retired plans.
2. No delete. Add DELETE /:planId, allowed ONLY when zero subscriptions
reference the planId (any version) — a referenced plan version must survive
for reproducible repricing/audit, so an in-use delete returns 409 and the UI
says "retire it instead". The Delete button only shows when the plan has 0
subscribers.
3. The 6-column table overflowed max-w-3xl: action buttons overlapped and the
status badges wrapped to a second line. Replace it with a CARD list (one card
per planId, grouped across versions): name + status on top, price · hours ·
effective on a wrap row, "used by N" expandable to holder names, and actions
on their own bordered row — nothing overlaps, badges stay inline.
Build+lint 12/12 (i18n parity). Verified on a DB copy: unused plans report
deletable; retire→reactivate flips active back.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Deleting versioned plans is unsafe (a plan version referenced by a subscription's
planVersionId must survive for reproducible repricing/audit) — so instead of
delete, give the admin the VISIBILITY they actually needed:
- Hours column: a compact timeframes summary ("Hën–Pre 21:00–08:00" / "24/7"),
so two same-priced plans are distinguishable at a glance.
- Period + currency are already in the price cell; the hours column removes the
remaining ambiguity between night/day plans.
- "Used by" column: a count of subscriptions on each (current) plan (active /
total), expandable to the holder names — so you can see what depends on a plan
before retiring or replacing it. Computed client-side from the existing
subscriptions list (both screens are admin-grade; no new endpoint).
Build+lint 12/12 (i18n parity).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Selling/quoting a subscription resolved the plan version against `validFrom`,
but validFrom is a DATE (midnight UTC for "starts today"). A plan published
later the same day (effectiveFrom 15:22) then failed `effectiveFrom ≤ validFrom`
(00:00), so resolvePlanVersion returned null → "no active plan for that planId",
and the form's selectedPlan went null (hiding the new count field too).
The plan/price in force is determined by WHEN THE SALE HAPPENS, not by the
coverage start — like a tariff, the customer buys today's published rate. Resolve
at new Date() in all three sites (validate, priceSale, /quote); validFrom is kept
only for span pricing. Verified the two live plans now resolve.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
When subscriptions moved to the plan model the span became start + end dates,
which lost the simple "renew for N months/weeks/days" input — the operator had
to hand-compute the end date. (quantity is CARS, a separate axis, not periods.)
Add a count field to the sell form: the operator types e.g. 3, and validTo is
auto-derived as validFrom + count × the plan's period (day/week/month), with the
same month-overflow clamp the server uses (Jan 31 +1mo → Feb 28) so the preview
matches what's stored + charged. The end-date field stays directly editable for
an irregular span (the hotel checkout case), and editing it isn't overwritten by
the count effect. The count row shows the plan's unit ("× month").
Build+lint 12/12 (i18n parity).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The timeframes model was a coarse weekday/weekend split, which couldn't express
"open Saturdays" or different rules on a specific day — and it didn't match the
V2 tariff, which already has a proper per-day-of-week picker (Hën–Die).
Replace PlanTimeframes { weekday, weekend } with { days[], fromMin, toMin }: the
allowed window applies only on the selected days (0=Sun..6=Sat; empty = every
day); on unselected days the subscriber parks free. A "night plan, free
weekends" is just days [Mon..Fri] with a 20:00→08:00 window — the exact case
from before, now expressible alongside any other day combination.
outOfWindowGap reworked to the days model (per-day membership test instead of
the weekend helper); the plans editor reuses the tariff composer's Mon-first
checkbox row and the shared tariff.dow0..6 labels. No production plans carry
timeframes yet (feature shipped today), so the shape changed directly with no
migration. Unit tests updated + extended (Saturday-only, every-day, weekday
night); 81 shared tests pass. Build+lint 12/12.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
`db:migrate` (and drizzle-kit's config default) resolved DATABASE_URL to
`./parking.sqlite` relative to packages/db — a stray, half-empty leftover DB,
not the real store at apps/server/parking.sqlite. Running `pnpm --filter
@parking/db db:migrate` with no env therefore migrated the wrong file and
failed on its broken state, while the real DB went untouched.
Default DATABASE_URL to ../../apps/server/parking.sqlite in both the db:migrate
script and drizzle.config.ts (an explicit DATABASE_URL still overrides). The
stray packages/db/parking.sqlite was untracked + already gitignored (*.sqlite);
deleted it from disk. Now `pnpm --filter @parking/db db:migrate` targets the
appliance DB out of the box.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Three subscriber enhancements driven by real scenarios (migration 0011, all
additive columns — backward-compatible).
1. QUANTITY. One subscription covers N cars (a family pays once for two). Sale
amount = span price × quantity; maxConcurrent defaults to the quantity so all
N cars can be inside. Quantity rides in the payment payload.
2. PLAN TIMEFRAMES → TARIFF BRIDGE. A plan may restrict WHEN a subscriber may
park (e.g. weekday 20:00→08:00, weekend all-day). A scan outside the window is
NOT refused — the out-of-window minutes are charged at the normal TRANSIENT
tariff (the subscriber is a transient for that time):
- early entry: arrival → window-open, DEFERRED (signed as windowOwedMinor on
the vehicle_entry payload), collected at exit;
- late exit: window-close → departure, and exit is GATED
(sub.refused.unpaidWindow) until paid at the booth.
Pure, tz-aware outOfWindowGap in @parking/shared (12 unit tests); pricing
reuses computeFee + the active tariff version
(apps/server/src/subscription-window.ts). The exit refusal is a host-ONLINE
business gate — the fail-open rule still governs the offline path.
3. RESERVED SPOTS. Site toggle reserve_subscriber_spots: occupancy holds
max(0, quantity − itsCarsInside) per active subscription, so transients see
"full" sooner; effectiveFree = capacity − count − reserved. Subscribers are
never gated by full.
UI: quantity field + ×N quote (SubscriptionManager); timeframes editor
(SubscriptionPlansManager); reserve checkbox (SiteSettings); booth pay modal
shows an "OUT-OF-WINDOW" charge and takes payment to clear the exit gate.
Verified on a copy of the live DB: qty 2 = 2× price; a night-plan 19:30 entry →
30min/15,000 ALL owed, stamped + paid → gate clears, chain verifies; the reserve
toggle holds a qty-2 sub's 2 spots. Build+lint 12/12; 80 shared tests pass.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Re-model subscription pricing from per-row, operator-typed prices into an
admin-composed, versioned PLAN CATALOG (the tariff pattern). The operator now
SELLS by picking a plan over a date span; the price is LOOKED UP, never typed —
removing the fat-finger risk on a money field — and day/week/month periods make
the hotel "guest stays 1–N days" case a daily plan over a check-in→check-out span.
- Schema/migration 0010: new `subscription_plans` (immutable, effective-dated,
keyed by a stable planId; period day/week/month + per-period price + active
flag). `subscriptions` gains planId/planVersionId; period enum widened. Seeds a
"Monthly" plan from the existing site default price (no data loss).
- Pricing (pure, unit-tested in @parking/shared): periods = ceil(span / period),
amount = periods × per-period price. Ceil = any started period is full (hotel
practice). `resolvePlanVersion` picks the latest active version ≤ sale instant.
- Backend: new admin-only plan CRUD (`subscription:plan` permission); reworked
sell path derives the amount from the plan; `POST /api/subscriptions/quote`
returns a server-computed quote so the operator can't override it. The
signed-payment sale fix is unchanged — only the amount SOURCE moved; payload
now carries planId/planVersionId/periods. Updates never re-sell (price frozen).
- Frontend: SubscriptionManager sell form swaps the price field for a plan
picker + start/end dates + a live quote line. New SubscriptionPlansManager
(Setup tab) for the admin catalog. i18n (sq+en) for both.
Verified on a copy of the live DB: 0010 applies (existing subs intact), a
3-night hotel sale prices to 2,400 ALL, appends one signed payment with
planVersionId, chain verifies. Build+lint 12/12; 68 shared tests pass.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The "X-REPORT / Z-REPORT" labels are till-accounting jargon operators don't
recognize. Relabel the user-facing strings to plain wording in both catalogs —
SQ: "ARKËTIMET DERI TANI" / "MBYLLJA E TURNIT"; EN: "TAKINGS SO FAR" /
"SHIFT CLOSE". The X/Z naming stays in code (xReport/zReport keys, the
shift_z_report event, currentReport) and the wiki.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Let the operator see, on demand during an open shift, the opening float
inherited, cash/card collected so far, pay-ins/pay-outs, and the current
expected drawer balance — without closing.
GET /api/shift/report (shift:read; 204 when no shift is open) returns the same
drawer projection the Z-report computes. Factored that math into a shared
ShiftService.#summariseWindow(open, asOf) used by BOTH the X-report (asOf=now,
read-only) and close()'s Z-report (asOf=endedAt, signed), so the two can't
drift. The X-report appends NOTHING — it's a snapshot, not an accountability
mark; the Z-report at close remains the signed record.
UI: a "Takings so far" button on the shift control reveals a cyan X-report
panel; the header still shows the live drawer total for the at-a-glance figure.
Verified against a copy of the live DB: X figures match drawerBalance(), the
drawer identity holds, zero events appended, chain still verifies.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Replace the single signed-± cash_movement with two distinct financial
documents — the direction is the event TYPE, not the sign of an amount:
cash_in = Mandat Arkëtimi (receipt / pay-IN, +) voucher AR-NNNN
cash_out = Mandat Pagese (disbursement / pay-OUT, −) voucher PA-NNNN
Each carries a positive magnitude, voucher number, reason, the operator who
raised it and the admin who authorized it, and prints an Albanian slip.
Authorization changes from admin-only to operator-RAISED / admin-AUTHORIZED:
any shift:create holder raises the voucher, but POST /api/cash-voucher only
commits when authorizedBy is a real admin (shift:cash) re-entering their
password (verified server-side). Keeps the float control while letting the
operator do the booth paperwork.
Legacy cash_movement events are kept — they still verify and still fold into
the drawer (signed-±); the append-only chain is never rewritten. The drawer
fold and the Z-report window now sum all three types.
Verified against a copy of the live DB with the real signing modules:
cash_in 3000 + cash_out 5000 → drawer −2000, hash-chain verifies OK.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Creating a priced subscription wrote only the mutable `subscriptions`
master row and appended NOTHING to the signed ledger — so the cash an
operator collected showed in the live feed, drawer, and shift Z-report
nowhere, leaving no signed trace. A booth operator could sell
subscriptions and pocket the money untraceably — the exact
operator-as-adversary path the append-only signed ledger exists to close.
Found live: 3 priced subscriptions (27,000 ALL) had zero payment events.
Selling a priced subscription now appends a signed `payment` event at
create time: amount = priceMinor x months (full multi-month prepay),
operator-chosen tender (cash->drawer / card->bank), payload
{ subscriptionSale: true, permitId, operator, months }. Folds into the
shift Z-report/drawer with no new summing logic; the feed badges it
"subscription sale" and resolves the holder name. The create response
returns the recorded { sale }; subscriptionRoutes now takes the EventLog
and ShiftService.
Not hard-gated on an open shift (a sale can happen outside the booth money
path) — it warns instead. The 3 historical off-book sales are not
back-fillable (append-only forbids forging dated events) — reconcile via
cash_movement or a Z-report note.
Verified against a copy of the live DB with the real signing modules:
signed payment appended, hash-chain still verifies, lands in shift cash
totals. Build + lint 12/12.
Wiki: subscription "Collecting the fee" deferred -> BUILT (+ the off-book
hole and why); shift sale-folds-in; threat-model worked example
("store the price != account for the sale").
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Surface the advisory ANPR plate (device_events kind="read", keyed by
session identity — unsigned, prunable, never an access decision) next to
entry/exit events in the live feed and on active-session rows.
Resolved at serialize time (new plate-lookup.ts; prefers an entry read;
one device_events scan per page) like subscriber-name enrichment — the
signed ledger is untouched. Adds plate? to the shared LedgerEvent and to
ActiveSession/SessionLookup; a small amber badge in the UI.
Caveat: a vehicle_entry is signed + pushed over WS before the async ANPR
read lands, so a fresh feed row may show no plate until reload; always
present on active sessions.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
priceMinorPerIncrement is per BILLING INCREMENT, not per hour. Documented
the effective-hourly formula (price x 60/incrementMin) as a callout after
recurring "Lab is wrong" confusion (weekend 3h=600 not 300 was correct),
and filed a per-hour-preview composer UX candidate under Open.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
A stepped ("up-to") default card prices the whole stay as one total, so the V2
engine short-circuits to steppedFee and NEVER consults windowed cards — any
time/seasonal tiers would silently never fire. Found live: an active tariff had a
stepped base plus weekday-night + weekend tiers, and every 3h stay priced 600 ALL
regardless of hour/day because the tiers were dead.
- validateTariffV2 now rejects a stepped defaultCard combined with windowedCards,
with an actionable message (switch the base to ladder/flat, or remove the tiers).
- Composer shows an inline red warning the moment base mode is stepped and tiers
exist; publishing is blocked server-side regardless.
- ApiError now carries the server's problems[], so the publish error surfaces the
SPECIFIC reason instead of a generic "invalid tariff structure".
- 2 new validation tests (55 pass).
Wiki: tariff, log.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Owners often state rates as a total-by-duration matrix (0-1h=200, 0-3h=500,
0-6h=800, 0-9h=900, 0-12h=1000) that the marginal hourly ladder can't express
(the ladder sums per-increment rates; this is cumulative totals at thresholds).
Add STEPPED as a third pricing mode alongside the ladder and flat.
- @parking/shared: TariffStep {uptoMin, totalMinor} + a `steps[]` field on V1
structures and V2 cards (mutually exclusive with blocks/flatMinor). steppedFee():
smallest tier with uptoMin >= duration wins (INCLUSIVE boundary), the top tier
repeats as a per-day cap; wired into computeFeeV1 + computeFeeV2 (V2 default card
only — a whole-stay total can't be sliced per-increment by a windowed card).
Validation: ascending uptoMin, non-negative totals, no daily-cap-with-steps,
steps-only-on-default. priceSession/quote/booth/Lab price it via the shared core.
- Composer UI: a "By duration (up-to)" mode with an up-to/total table (base card
only). i18n modeStepped/steppedHint/stepUpTo/stepTotal/addStep (sq+en).
- 8 new unit tests incl. the exact owner matrix, multi-day repeat, overstay, and
validation (53 pass). Verified end-to-end via the UI: authored + published the
matrix, Tariff Lab prices it exactly (3h->500, 6h->800, 12h->1000, 2d->2000).
Wiki: tariff (three pricing modes + stepped semantics), log.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Test rates "in time" (overnight windows, daily caps, overstay) in seconds against
any tariff version, instead of waiting hours/days. No real ledger writes.
- Extract priceSession() into @parking/shared: the grace/overstay wrapper over
computeFee (unpaid -> entry..now; within-grace -> settled 0; grace-expired ->
overstay, a fresh period from grace-expiry). PayStation.quote() now calls it so
the booth and the lab can never diverge.
- API (tariffs.ts, tariff:read, read-only): POST /api/tariff/simulate prices a
hypothetical session (active/any version/inline structure) and returns the
priceSession outcome + a 30m..3d duration curve (see where the daily cap flattens);
GET /api/tariff/simulate/session/:identity prefills from a real ledger session.
- UI TariffLab.tsx at Setup -> "Tariff Lab": version picker, entry/asOf times,
optional payment+grace, category, and load-a-real-ticket. Admin-gated, available
on-site (useful to quote a dispute).
- 4 new priceSession unit tests incl. the ticket-1245791632490 overstay-not-zero
regression (40 pass). i18n lab.* + nav.tariffLab (sq+en). Verified live via the UI.
Wiki: tariff (priceSession + Tariff Lab as-built), log.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Rework paid-but-grace-expired sessions and add booth filters.
Overstay (was "stuck"):
- Stop silently aging out a paid transient whose walk-back grace lapsed with no
signed exit. Keep it listed with an OVERSTAY badge — a new parking period began
(re-parked) or the car is faulty/abandoned; it is not a system fault.
- No free exit: reopenBarrier refuses server-side once a transient's payment grace
has expired (allow only subscription OR paid-and-within-grace); the UI hides the
Open-barrier button on overstay rows and routes to the pay/exit modal. Closes a
hole where a stale payment authorized a free multi-day exit (operator-as-adversary).
- Price the overstay as a NEW period from grace-expiry -> now with its own daily-cap
ladder, NOT "full stay minus paid" (which a daily cap collapsed to 0 — ticket
1245791632490 owed ALL 0; now owes its real overstay). quote() gains periodStart +
overstay; SessionLookup/ActiveSession gain `overstay`. handlePayAndExit charges
whenever the session is payable (was: only if !alreadyPaid, skipping the overstay).
Filters (new ui/FilterBar): Active Sessions — search + status
(unpaid/paid/exiting/overstay) + transient-vs-subscriber. Live feed — search +
event (entry/exit/pay/void/anomaly) + direction + source (booth=manual vs reader).
All client-side over already-fetched data; matched/total count shown.
i18n parity (sq+en). Wiki: booth-exit-flow updated (overstay model, naming history,
no-free-exit security fix, new-period pricing; open question on grace-renewal noted).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The session list filled to its content height instead of clipping, so a long list
(29 sessions) overflowed the column instead of scrolling — unlike the live feed.
The ActiveSessions Panel sat in a plain block wrapper, so it sized to content and its
inner `h-full overflow-y-auto` had no bounded height to scroll within. Make the wrapper
a flex column and give the Panel `flex-1` so it fills the column; the inner scroll area
is then bounded and scrolls — matching the live-feed treatment.
Verified live (Playwright): the scroll container is now 437px tall over 1118px of
content → scrollable, while the live feed is unchanged.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The ANPR plate was saved (device_events kind:"read") but had no UI. Extend
GET /api/snapshots/by-identity/:identity to also return plates[] (plate, confidence,
region, direction, snapshotId, at) for that session, and render each as a cyan
"Plate: AA558EE 100%" chip in the SnapshotStrip — so it shows in both the booth
event-detail modal and the pay modal, beside the evidence photo, no separate screen.
Deduped by plate+direction; session:read gated; i18n sq+en.
Verified: by-identity returns plates[] for a seeded read (200, AA558EE 0.999 Albania
entry). Build + lint green.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Rework the ANPR trigger to the real design: when a transient presses the button or a
subscriber passes QR/RFID, the entry/exit fires and takes its evidence snapshot — that
is the moment to recognize. snapshotAsync now takes the VisionClient and, after storing
each snapshot from an opt-in (config.anpr) camera, runs ANPR on the SAME image and
records the plate against the SAME session identity (device_events kind:"read" with
plate/confidence/region/snapshotId/source:"entry-exit-snapshot"). One image serves both
evidence and plate extraction; recognition fires only on a real entry/exit — no polling.
The entry/exit/subscription flows take an optional VisionClient and pass it through;
server.ts wires it. Removed the polling VisionReader and VISION_POLL_MS/VISION_DEDUPE_MS.
Advisory + fire-and-forget: a low-confidence/no-plate result records nothing, a vision
failure never delays or changes the open, and the plate does not feed the access
decision. Verified e2e: a simulated entry snapshot on an anpr camera (live fast_alpr)
stored the snapshot for the session and recorded {identity, plate:AA558EE, 0.999,
region:Albania, snapshotId}. Build + lint green.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Make the vision service genuinely configurable (was env-only).
- SetupWizard: an "ANPR" checkbox on the camera form (writes config.anpr; persisted
only when on; sq+en) — opt-in is no longer raw JSON.
- DeviceMonitor optionally takes the VisionClient and probes /health each tick, emitting
a "vision" pseudo-device → a Vision chip (ready/degraded/offline + recognizer) in the
booth footer when VISION_ENABLED, no chip when off. Widened the DeviceStatus category
union (server + web) + footer maps + devices.catVision. Verified: ready/fast_alpr when
up, 0 chips when disabled.
- apps/vision/.env.example (Python service) + a VISION_* block in apps/server/.env.example
(Node side) + a Configuration section in opencv-anpr-service.md covering all four
layers and the caveats: the two processes share the VISION_ prefix but need SEPARATE
.env files; bind /analyze to 127.0.0.1; cache model weights at deploy; an unbound anpr
camera recognizes but every read is refused.
Build + lint green.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Answers "is a recognized plate saved?" — now yes, for both transient and subscriber, as
an ANPR audit trail independent of whether it matched anything.
VisionReader now stores the snapshot bytes in `snapshots` keyed by identity=PLATE — the
same identity the flow signs its anomaly/event with — so GET /api/snapshots/by-identity/:plate
(the booth event-detail modal's snapshot strip) shows the car's photo against that
anomaly with no UI changes. It also records an unsigned device_events{kind:"read"}
breadcrumb (plate, confidence, region, model, snapshotId, and the dispatch outcome) as a
queryable recognition log. Switched from emitRead to calling ReadDispatcher.dispatch
directly (like qr-reader) to capture that outcome.
Non-blocking: a refused read (no session / unpaid / unknown plate) just returns
rejected — no barrier hold — and is logged with its snapshot for investigation. Plate
stays advisory (exit demands payment; subscription matches only a bound plate).
Verified e2e: a recognized AL plate with no open session signed exit.refused.noSession
(identity=plate), stored a 555KB snapshot under that plate, recorded the read breadcrumb
(accepted:false, reason "no open session"), and by-identity returned the image — the
refused read is fully investigable with its picture. Build + lint green.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
A VisionReader polls each opt-in camera (config.anpr===true, off by default) every
VISION_POLL_MS, captures a snapshot, recognizes via VisionClient, and on a confident
plate emits deviceEvents.emitRead({kind:"plate", value}) — the same event a physical
plate reader sends, so the existing ReadDispatcher routes it to the subscription/exit
flow unchanged (no flow rewrite).
The plate stays advisory by construction: the exit flow still demands a covering
payment, the subscription flow only matches a bound plate. Guards: low-confidence reads
dropped; debounce (VISION_DEDUPE_MS) so a parked car doesn't re-fire; per-camera
in-flight guard; idle when vision is off or no camera opts in. #recognizeOn is public
for a future on-demand (loop-edge/API) trigger.
Verified end-to-end: an in-memory anpr camera (AL plate image) + live fast_alpr service
→ VisionReader emitted exactly one {kind:"plate",value:"AA558EE"} onto the bus; debounce
held it to 1 emit over 7 polls. Build + lint green. Updates opencv-anpr-service
(trigger-wiring + per-camera opt-in marked done).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Node-side adapter to the apps/vision ANPR microservice (localhost HTTP: POST /analyze
with snapshot bytes, GET /health), returning a normalised VisionResult or null. Enforces
"advisory, never sole authority" at the boundary: opt-in (VISION_ENABLED, default off),
fail-soft (any error/timeout/unreachable → null, never throws into the lane → ticket
fallback), and re-applies the confidence floor (VISION_MIN_CONFIDENCE) on top of the
service's own low_confidence flag. Per-request AbortController timeout so a slow call
can't hang the barrier. Constructed in server.ts.
Verified: fail-soft (disabled/unreachable → null, no throw) and live end-to-end (Node
client → running fast_alpr service → AA558EE 0.999, region=Albania). NOT yet wired into
the read bus — the opt-in snapshot→DeviceReadEvent{kind:"plate"} trigger is the next
step. Build + lint green. Updates opencv-anpr-service (adapter gap marked done).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Record the verdict: the ANPR service is worthy to consume NOW as an advisory plate
IDENTITY source (Job 1) — the flows already treat a kind:"plate" read as first-class
(exit signs source:"lpr"; subscription matches read plate vs bound plates), so it feeds
an existing input with no flow rewrite. It is NOT worthy as the sole authority to open a
transient barrier (a plate is not a payment; spoofing needs Job 2 vehicle verification,
unbuilt) — gated by the confidence floor with ticket/manual fallback. Lists the four
gaps before consumption (VisionClient adapter, opt-in trigger, field accuracy,
weight-provenance). Next step is the adapter, not more model work.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Benchmarked fast-alpr's four fast-plate-ocr models via the full pipeline on real AL
plates (AA558EE, AA687KE), CPU. All four read both correctly; the default
cct-xs-v2-global-model wins on confidence (0.999/1.000) AND speed (33-39ms) and returns
region=Albania. The "European 40+country" model is WORSE here (~0.77 confidence, one
synthetic misread) — overturning the "EU model better for AL" assumption from the prior
research. Decision: no config change. Resolves the AL-accuracy-benchmark open item
(results table + finding added to opencv-anpr-service); weight-provenance remains the
one open recognizer item. Re-benchmark on real on-site captures once cameras installed.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Add a dev CLI (uv run python -m vision_service.cli <image>) that runs a recognizer on
an image file and prints the parsed plate(s) + confidence + region — fast feedback with
no HTTP. Also a package.json `recognize` script and a vision-recognize entry point.
Verified fast-alpr for real: installed the `alpr` extra, downloaded the YOLOv9 + CCT
ONNX weights (~11MB, cached offline under ~/.cache), and ran recognition on the
project's test image → "5AU5341" at 1.000 confidence, region "Czech Republic", ~40ms
on CPU, via both the CLI and POST /analyze.
Fixes result parsing against the actual fast-alpr API: ocr.confidence is a LIST of
per-character confidences (not a scalar) — reduced to one plate confidence via the MIN
(a plate is only as trustworthy as its weakest character); also surface ocr.region.
Extracted the per-result mapping into a pure plate_from_alpr_result + _reduce_confidence
and unit-tested them (no model weights needed). 7 tests pass; ruff + mypy strict clean;
full turbo build/lint/test green.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Skeleton of the host-side vision service per the packaging decision: a Python/FastAPI
app at apps/vision/, uv-managed, wired into the Turbo graph via a thin package.json
shim (dev/lint/test/build → uv/uvicorn/ruff/pytest). A per-package turbo.json sets
build outputs [] so the no-op build is warning-free.
Endpoints: GET /health (readiness + model version) and POST /analyze (raw
octet-stream body, so Node POSTs Snapshot.bytes directly; empty→400, oversize→413,
recognizer-not-ready→503). The recognizer is a Protocol with a StubRecognizer (no
models, boots/tests offline — the dev/CI default) and a FastAlprRecognizer (the real
MIT YOLOv9+CCT/ONNX stack, lazily imported; missing models ⇒ ready=False, not a crash)
— the device-adapter pattern applied to the model. fast-alpr + onnxruntime are an
optional `alpr` extra, so `uv sync` needs no model download.
Verified: turbo run lint|test|build includes @parking/vision and stays green; uv run
mypy strict-clean; uvicorn boots and serves /health + /analyze live; pnpm workspace
6→7. Not built yet: the Node VisionClient adapter, a Dockerfile + model fetch, and
Job 2 (vehicle verification). Updates the packaging decision (As-scaffolded) + log.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Settle WHERE the host-side ANPR service lives and how it joins the build: in this
monorepo at apps/vision/ (not a separate repo), still a separate OS process called
over localhost HTTP, wired into the Turbo graph via a thin package.json shim whose
scripts shell to Python tooling (uv/uvicorn/ruff/pytest). Co-located source honors the
vision-service runtime+license isolation decision (AGPL reach is a linking boundary,
not a folder); the fast-alpr MIT baseline removes most of the split-repo pressure
anyway. New page vision-service-packaging; updates vision-service, opencv-anpr-service,
the CLAUDE.md layout, index, log. Not built yet — packaging decision only.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Research note from the recognizer-options query. fast-alpr v0.4.0 (MIT) — a swappable
YOLOv9-detector + CCT-OCR pipeline on ONNX Runtime, CPU-only and offline — fits the
decided vision-service architecture and is MIT end-to-end (code + published weights),
so the ANPR path may not need the scoped AGPL exception. Flags the open caveats:
verify model-weight provenance, and benchmark AL-plate accuracy (default global vs.
the 40+ country EU model). fast-alpr is plate-only, so the vehicle-verification job
stays ours to build. Decision kept open. Updates opencv-anpr-service (new "Recognizer
evaluation" section + licensing nuance), vision-service (open/next), index, log.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Sync the two canonical reference pages with this session's features: local-jwt-auth
gains the new log resource / log:read permission in the RBAC grid (links app-logs);
first-run-setup notes the one-car-one-ticket presence-loop/cooldown guard the admin
configures on a relay (links entry-double-press).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Three booth-integrity improvements that share the entry/exit flows and activity log.
Refusal snapshots: previously only an accepted open captured a camera image; now
every refusal/hold anomaly fires the directional camera too (a turned-away car is
exactly the evidence wanted) — entry refused-full/held, exit refused
closed/no-session/unpaid/grace-expired (booth + reader paths), refused subscription.
A refused entry has no ticket id, so a synthetic REFUSED- ref keys the anomaly + photo
together. Same fire-and-forget contract; failed captures still show as tiles.
Subscriber access medium: the subscription flow already signed `via`
(qr|card|plate) into entry/exit payloads; surface it as a typed LedgerPayload.via, a
cyan chip in the ticker, and an "Entry medium" modal row (sq+en). Display-only.
One car = one ticket: the entry button could be mashed to mint many tickets per car
(corrupting occupancy + enabling ticket-shopping at exit) — the old #inFlight guard
only blocked overlapping presses. Add a per-relay guard configured on the relay spec:
PRESENCE mode (presenceInput ties ticketing to a vehicle loop on a Dingtian input —
one ticket per car, re-armed when the loop clears) or COOLDOWN fallback
(entryCooldownSec) when there's no barrier feedback. A suppressed press is unsigned
device_events telemetry, not a signed anomaly. SetupWizard exposes both fields.
Fail-closed entry and barrier-is-not-a-door invariants untouched; guard state is
in-memory/rebuildable, starts armed after restart.
Wiki: new entry-double-press; updated entry-exit-points, booth-console, index.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Add a third data stream (app_logs), distinct from the signed ledger and device
telemetry, for operational/diagnostic logs — an offline appliance has no Sentry to
ship to, so the host is the log store.
Backend: a pino stream tees warn/error/fatal into app_logs (info/debug stay
stdout-only) with no call-site change; the DB is built before Fastify so the logger
has its sink. Frontend (lib/logger.ts): ships failed API requests (minus 401 churn),
window.onerror, unhandledrejection, and a top-level React ErrorBoundary; console
warn/error forwarded only at debug/trace. Batched/throttled POST, sendBeacon on
pagehide, loop-safe (never logs the /api/logs call), best-effort everywhere.
POST /api/logs (any signed-in user, CSRF, tolerant) + GET /api/logs gated by a new
log:read permission (new `log` RBAC resource; admin holds it). Retention: pruned by
age + row cap, hourly + at startup. UI: a Logs screen under /setup (filter
level/source/since, expand to context+stack), sq+en. Migration 0009_app_logs.
Verified end-to-end via app.inject: login -> POST 204 -> GET 200 with the record;
backend warn/error persisted, info dropped; non-admin GET 403 / POST 204.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The Cashino KP-300H printed entry tickets as raster garbage (solid black
bars / banding) while the Rongta printed the same byte stream fine. Root
cause: the barcode overflowed the print line, not data corruption.
A 13-digit Code128 at module width 3 is ~534 dots. The KP-300H prints 72mm
(512 usable dots at 203 dpi), so the symbol overran the line and the firmware
rendered the overflow as raster noise. The Rongta runs 80mm (576 dots) and had
just enough room — which is why only the Cashino failed. Confirmed on hardware:
plain text printed clean, the barcode was the trigger, and an 11-digit code at
width 3 (~468 dots) both fits and scans the full value at the exit reader.
- Ticket IDs reduced 13 → 11 digits (10 random + Luhn). Length is driven by
guess-resistance (10^10 space, ~1-in-10^7 to hit a live OPEN ticket even with
thousands parked — the booth-operator threat model), not volume.
- validateTicketCode is now length-agnostic (\d{10,14} + Luhn) so legacy
13-digit tickets still in circulation keep validating; the id stays opaque.
Also: sendRaw now closes the print socket GRACEFULLY (end()+FIN, wait for
close) instead of write-then-destroy, which could RST mid-stream and truncate a
job. A separate latent bug found while diagnosing, fixed here.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Dates were raw ISO on printed slips and time-only in the UI (a session from
two days ago showed just "10:48"). Make them human and day-relative. Also fix
a latent toggle bug surfaced while testing.
Dates:
- Printed tickets/receipts/subscription cards now show "19 Qershor 2026
10:48:25" (Albanian month, 24h with seconds) instead of YYYY-MM-DD HH:MM.
stamp() exported as formatStampSq so the shift Z-report shares it.
- Shift Z-report is now Albanian (Operatori/Nga/Deri/Para në dorë/Arka…),
was English-only with ISO dates.
- Web sessions/logs/history show relative days: "Sot 10:48" / "Dje 17:33" /
"17 Qershor 10:48" via formatRelativeDateTime(). Month names come from the
i18n catalog (common.months), NOT Intl — the appliance browser's ICU lacks
Albanian locale data and Intl silently falls back to English month names.
Toggle fix:
- The language + theme toggles read the active value from the TanStack Router
context `user`, which is captured at route-resolution time and does not
re-render on setUser. After one switch the highlight froze and the equality
guard blocked switching back until a page refresh. Drive them off live state
instead: language from i18n.language (useTranslation subscribes to
languageChanged), theme from local useState. (Bug dated to 040c0ff.)
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The live activity feed flagged anomalies with no explanation and showed
opaque session keys. Make events self-describing and clickable.
- Clickable feed rows → read-only event-detail modal: humanized fields,
entry/exit snapshots, and signed-chain provenance collapsed behind an
audit disclosure (operator sees the story, auditor expands for crypto).
- Localized reason codes (backend i18n): the signed ledger now carries a
stable REASON_CODE + params (+ English fallback) instead of free-text
English. The UI translates via reason.<code> catalogs in sq/en, so an
Albanian operator reads Albanian — from the same immutable event. Adding
a language is a catalog change, no re-signing. (@parking/shared
REASON_CODES, reasonPayload; entry/exit/subscription flows emit codes.)
- Subscriber-name resolution: a SUBSESS-… occurrence now shows the
subscription holder's name (fallback "Abonent"/"Subscriber"). Resolved
read-time server-side (events API + WS push) as a non-signed
subscriberLabel; cached with invalidation on subscription edit/delete.
- Failed-snapshot visibility: a camera that was attempted but unreachable
now shows a "⚠ camera unreachable" tile instead of a silent gap. The
snapshots API returns failures[] from telemetry, filtered so a recovered
capture shows no stale warning.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Consolidate the config screens under a single /setup hub with permission-
gated tabs (Devices/Tariff/Subscriptions/Site/Users/Roles/Shifts), collapsing
the top nav to Booth·Shift·Setup; old top-level paths redirect.
Users: add optional profile metadata (full name, phone, email, address) on
create/edit. Theme: a light palette saved to the user's profile (users.theme),
toggled in the header beside the language switch and applied on load like the
language preference. Both ride on a single additive migration (0008).
Shift history: a new GET /api/shifts folds the signed shift_z_report chain into
completed shifts, SCOPED server-side — operators see only their own; holders of
shift:cash see all with an operator + date-range filter. Surfaced as the Shifts
tab; an operator cannot read another operator's takings (param spoofing is
ignored).
These three features share the router, api client and i18n catalogs, so they
land together. Verified live: theme persists across reload, metadata round-
trips to the DB, and shift scoping holds (operator self-only, admin all+filter).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Add a reusable ui/Modal (Radix Dialog + terminal chrome) and move the
add/edit forms in the Devices setup, Subscriptions and Roles screens into it,
leaving each list in the page behind the modal. The Devices wizard's per-
category device form is also fully translated (setup.* i18n keys).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The TRM tokens were good but every screen hand-rolled inputs and buttons as
bare outlines on near-black panels, so fields, cards and buttons were
visually indistinguishable. Add a component layer (.input/.select/.textarea
as recessed slots, .btn family with a FILLED primary, .card scaffolding) and
adopt it across the booth/shift/login/tariff/site screens — several of which
were still light-theme inline styles dropped on a dark background.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The dynamic-RBAC management routes are themselves grantable (role:* and
user:*), so a non-admin holding them could self-escalate: edit their own
role to add a permission they lack, mint a privileged role, assign someone
the admin role, or reset/delete a more-privileged account. Found by the
commit security review (2× HIGH).
Fix — enforce the RBAC invariant "you cannot grant beyond yourself":
- roles.ts: role:create/update reject any permission not held by the caller
(escalates()). An admin holds the full set, so it stays unrestricted.
- users.ts: user:create/update reject assigning a role whose permissions
exceed the caller's; update/password-reset/delete reject acting on a user
whose current role exceeds the caller's (exceedsCaller()).
The existing no-lockout + builtin-admin protections are unchanged.
Verified: 10-assertion inject test — manager (role:* + user:* but no
tariff:update, not admin) gets 403 on self-grant, minting a privileged role,
assigning/resetting/deleting an admin; admin stays unrestricted; the manager
can still create peers + in-scope roles (not over-blocked). Full build green.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Replace the hardcoded role enum (admin/operator/cashier/readonly, checked
literally as requireRole("admin",...) across ~15 routes) with dynamic RBAC:
roles are DATA, route guards check a PERMISSION.
@parking/shared defines a code-defined grid: RESOURCES (user/role/tariff/
subscription/site/device/shift/payment/session/event/report) × Action
(create/read/update/delete + domain verbs void/cash) -> PERMISSIONS
(resource:action, e.g. tariff:update, payment:create, event:void).
DB: new roles + role_permissions tables; users.role enum -> role_id FK;
migration 0007_rbac (create tables, seed the builtin admin role + all 26
perms, seed operator/cashier/readonly composable roles matching old
behaviour, rebuild users to swap the column copying all rows).
auth.ts: JWT payload role -> roleId; permissionsFor(roleId) with an
in-memory cache + bumpPermsCache(); requirePermission(...perms) preHandler;
requireAuth for /me & /language; initAuth(db) wires the resolver once. Every
route guard mapped to a permission; device ingress (devices/qr-reader) stays
auth-free by design. New routes/users.ts (user:* CRUD, bcrypt 12, last-admin
guard) + routes/roles.ts (role:* CRUD, builtin-protected, perms validated
against the grid, cache bump on write). auth/me + /login return
{roleId, roleName, permissions, language}. seed-admin -> roleId:'admin'.
Frontend: SessionUser carries permissions + can() helper; router nav/route
guards gate by permission (requirePerm replaces adminOnly); SiteSettings
edit gated by site:update; new UsersManager + RolesManager (permission
checkbox grid; admin role locked); i18n nav.users/roles + blocks (sq+en).
Decisions: one role per user; protected built-in admin (no-lockout: the last
admin can't be deleted/downgraded); JWT carries roleId, perms resolved
per-request so role edits apply immediately (no re-login).
Verified: full build green; 20-assertion inject test passes (cashier 403s on
tariff publish + user list, admin passes, granting a perm applies on the next
request, last-admin + builtin-role protections return 409); migration 0007
applied to a copy of the live DB (incl WAL/shm) — existing admin maps to
role_id='admin', all rows preserved. Append-only event chain untouched
(event:void gates appending a void, not a delete).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
After a completed payment the customer always gets a transparency record:
entry time, payment time, duration parked, amount + tender. One shared
ESC/POS renderer (renderReceipt + ReceiptData in @parking/devices), two
modes: VOUCHER = those figures PLUS the scannable Code128 barcode and an
emphasised walk-back-grace line, so the one slip both proves payment and
self-exits at a distant exit reader (replaced the old barcode-only voucher);
STANDALONE = detail-only, auto-printed at payment when no voucher is issued.
Figures fold from the SIGNED ledger (latest payment event); printed on the
booth printer (failover to dispenser). Best-effort: a printer fault never
blocks the exit that already happened — the modal shows a note and offers
"Reprint receipt".
Server: booth-print.ts printPaymentReceipt() + receiptFigures(); routes
POST /api/voucher (voucher) + new POST /api/receipt (standalone/reprint).
Both ESC/POS drivers gained printReceipt(). Web: BoothPayModal auto-prints
after a non-voucher payment + reprint button; api.ts printReceipt().
CP852 fixes found on a real printout: (1) uppercase Ë was mapped to 0xEB
(that's ű) — correct byte is 0xD3; (2) Intl.NumberFormat injects a NO-BREAK
SPACE (U+00A0/U+202F) that isn't in CP852 and printed as "?" — line() now
normalises it to a plain space ("1000 Lekë"); (3) grace line wrapped
mid-word — split into two short lines.
Full build green; both receipt modes render-verified; routes live.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The rongta-printer "Deployment" section still described a single
2026-06-14 unit. The live site now runs two: entry-dispenser 10.0.10.9
(Cashino, `cashino` ping-only driver) and booth-receipt 10.0.10.10
(Rongta, full status-page monitoring). Follow-up to 3e6773a.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
julian