Per device (Dingtian relay board, DT-008 readers, Hikvision G3H camera, radar,
K200L / Rongta / Cashino printers): factory address and login, the tool needed,
what the wizard configures by itself on assign vs what is done by hand on the
device, how to verify, and the traps already paid for (unauthenticated Dingtian
CGI + session_en brick, duplicate reader IP, reader settings lost on reset, sub
stream mandatory, Alarm Server after assign + Vehicle target filter, close the
camera web UI, radar idle level, "Test" only probes a printer). Bring list, the
10.0.10.x address plan beside each factory address, the on-site order of work,
and the gaps still unrecorded. Linked from appliance-provisioning and the K200L
page; log entries for the day.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
The park-buzi printer is a K200L (Xprinter/ICS XP-K200L; its LAN board and USB
descriptor call it "POS-80"). Its board serves the Rongta's five-row status table
under /prt_status.htm — but the reply carries no HTTP status line or headers, which
node:http rejects, so the Rongta driver could never read it and the unit was filed
in July as "no status page → generic driver" (reachability only).
New `k200l` driver (printer-k200l.ts): prints through the generic ESC/POS device
(same bytes, TCP 9100 or usblp) and reads the page over a raw socket, tolerant of
both the headerless and a proper HTTP reply. Mapping mirrors the Rongta: board
unreachable → offline; page not understood → degraded, never ready; any fault →
degraded naming it; USB → reachability floor. The Rongta driver is untouched.
Tests replay the captured headerless page (devices suite 76). Live against the
lab unit: ready; with the cover open the board reports cover open, paper out,
off-line.
Wiki: new k200l-printer entity (names, network setup from factory
192.168.123.100, board quirks, status page, what it means for park-buzi — over
USB the app never saw cover/paper state at all), cross-links on the Rongta,
status-monitoring, USB-transport and WSL-networking pages (parking-net pinned to
eth1 while the LAN NIC is eth0), index.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
park-lab re-added to resources.toml for the reproduction box: copied from park-2 then
corrected — the copy carried park-2's review outbox (collector URL, booth-2 id, booth-2's
token), which would have fed the training pool under a booth's identity; removed, the
outbox is off on the bench. Pinned to the booth's stage-2d9bb15, comments say what the
lab is for.
Wiki, printer-usb-transport: the failing printer identified (USB 1fc9:2016 "POS-80", NXP
controller, no brand in the descriptor); attached to WSL via usbipd and cover-cycled — no
disconnect, no re-enumeration, so the stale /dev/usb bind-mount hypothesis is falsified
for this unit; the next discriminator is the monitor's offline detail text on park-buzi
(EBUSY / open timeout / EIO). WSL caveat: Microsoft's kernel lacks CONFIG_USB_PRINTER.
fleet-deployment-komodo: park-lab row updated. Log: both entries of the day.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
Subscription page: the one-window model can't express prepaid/postpaid, calendar or
anniversary anchoring, grace or an expiry notice; and renewal is OFF-BOOK today (a PUT
that appends no payment — the same hole closed for the first sale on 2026-06-20).
Designed: plan billing rule, per-day pricing so both anchors share one formula, open-
ended agreement, subscription_periods where each period is a ledger charge and a renewal
= paying the next period, one subscriptionAccess() gate function, expiry notice derived
not stored.
New decision page party-ledger: a counterparty sub-ledger for who-owes-whom across
modules — parties + signed charge / settlement / write_off events, balance derived never
stored, aging + statements + CSV; lands postpaid subscriptions, hotel guest-nights,
fleet washes on account, supplier/utility bills. Sub-ledger only: no bookkeeping, a
statement is not a fiscal invoice, parties per appliance. validation-sponsorship's
sponsor table marked superseded; open-questions #17; index.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
Trainer: `parking-trainer serve` — a stdlib HTTP job API on the compose network (never
published): /health, /readiness, /versions, /versions/<v>/report, /jobs. One job at a
time; each job runs the CLI as a subprocess with its output captured, state + log
persisted under /out/jobs/ so a restart keeps history. `publish` takes its URL from
TRAINER_PUBLISH_URL. Dockerfile: CMD serve, EXPOSE 8091, healthcheck.
Collector: COLLECTOR_TRAINER_URL + /api/training/{status,jobs,jobs/:id,versions/:v/report}
— a reviewer-gated proxy that forwards a fixed set of paths and whitelisted knobs and
passes the trainer's status codes through (409 while a job runs; 503 unconfigured, 502
unreachable). /review gains the Training section: labels per class vs the minimum with
Train disabled until two classes clear it, mode / backbone / floor, the running job's
live log, the versions with Report / Evaluate / Publish (publish confirms), and the
reminder that pinning stays a git commit. Fixed on the way: an apostrophe in the page's
inline script broke the whole page — a test now parses the script.
Compose: `trainer` is a service (restart: unless-stopped, read-only data volume, its own
trainer-out volume), the `train` profile and TRAINER_OUT are gone; the Docker-socket
route was rejected (root on the host for a service booths upload to). Verified with both
images running together: a Train started through the proxy finished, version and report
came back, the page rendered.
Wiki: bodytype-classifier-training (loop, running it, operating notes superseded),
vision-review-outbox, fleet-deployment-komodo, log.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
apps/trainer (parking-trainer): inspect / train / evaluate / publish. Reads the wash
collector's SQLite + crops read-only off its volume; time split (validation = newest
slice); thin classes dropped; damped class weights; `features` mode (frozen ImageNet
backbone, on-disk feature cache, seconds to retrain) and `finetune` mode (light
augmentation). CPU-only torch from PyTorch's wheel index. ONNX export checked against
the torch model; NO model file below the validation floor (exit 3, report still written);
exit 2 = not enough labels. `evaluate` scores a shipped model on labels reviewed after
training + the unlabelled pile; `publish` PUTs a version folder to a Gitea generic package.
Light core deps; the `train` extra is heavy — CI syncs without it, torch tests skip.
apps/vision: BodyTypeClassifier (bodytype.onnx + sidecar = the preprocessing contract:
crop margin, input size, RGB 0-255, normalisation inside the graph) and
RefinedVehicleDetector over YOLOX — refines only `car` or a class the classifier trained
on, min-confidence, `detector_class` on the result; path set but no file = phase B off
without an error; a broken file is a health detail. models/bodytype.version (tracked,
empty) pins the published version the Dockerfile fetches at build (BuildKit secret;
a pin that cannot be fetched fails the build). Verified: a trainer model gives identical
probabilities inside the vision service; both images built and smoke-tested.
Delivery: parking-trainer image in build-images.yml, the `trainer` compose profile on the
collector stack (CPU, read-only data, TRAINER_OUT), commented TRAINER_OUT/PUBLISH_TOKEN in
the wash-collector stack, .dockerignore for both Python contexts, trainer deps synced in CI.
Wiki: bodytype-classifier-training rewritten as built (+ one fleet model not per site,
secrets/access, where the crops live), opencv-anpr-service §Phase B, vision-review-outbox,
vision-service-packaging, fleet-deployment-komodo, index, log.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
The wash stream is small; the entry camera photographs every car in exactly the view the
classifier is trained on. The booth can now queue entry vehicle reads as pure training
material — crop + the camera's class, no order, no operator, no category.
- Core announces every vehicle read (deviceEvents.emitVehicleRead from snapshot.ts); the
Car Wash module listens, samples entry reads in-process (sampleEntry: exactly one in N)
and queues them (enqueueEntry). CARWASH_REVIEW_ENTRY_SAMPLE=N; 1 = every entry (storage
and bandwidth are not the limit — user); 0/unset = off. Forwarded by compose.
- Packages carry kind: "wash" | "entry". Collector: kind column, entry meta validated
without the operator fields, review screen shows an entry sample as such, export has a
kind column, operator agreement computed from wash items only. Setup line shows
"1 in N entries sampled"; status carries entrySample.
- komodo: park-2's four review lines enabled (collector URL by Netbird DNS name, booth-2,
the shared per-booth secret, every entry sampled) — the collector is up on the overlay.
- Tests on both sides. Wiki: vision-review-outbox (entry stream + the internet-feed
assessment), log.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
The far end of the Car Wash review outbox (wiki/concepts/vision-review-outbox.md): a small
Fastify + SQLite service in the monorepo (shares the payload contract and the class
vocabulary via @parking/shared), delivered to art-docker-station by its own stack so
nothing booth-side lands there and nothing of it on a booth.
- POST /ingest: bearer token per booth (constant-time), X-Booth-Id must match, multipart
meta + JPEG (magic checked, 2 MB cap), meta validated against the contract, idempotent on
the item id; crop stored at crops/<booth>/<item>.jpg on the volume + one items row.
- /review + /api/*: the reviewer's screen served by the process (Basic auth, one login):
one pending crop at a time, operator's pick and camera's pick beside it, one button/key
per vocabulary class + unusable + skip; stats per booth and per hashed operator
(agree / disagree / unusable — disagree = the reviewer's class is outside the operator's
category).
- GET /export/labels.csv: reviewed usable rows for training; formula-leading cells are
neutralised (booth-supplied names). Crops stay on the volume for the trainer on the host.
- Booth payload now carries operatorCategory.classes so the comparison needs no site setup.
- Delivery: apps/collector/Dockerfile (monorepo context), docker-compose.collector.yml
(bind to the overlay IP; commented `trainer` profile seam for the GPU), a third build
step in build-images.yml, a `wash-collector` stack in komodo/resources.toml with one
secret per booth referenced from both the collector's token list and the booth's own
stack (park-2 lines templated, commented, DNS name for the URL).
- Tests: app.test.ts (ingest ok/dup/refusals, review + stats + export, config). Image
built and smoke-tested locally (health, ingest, duplicate, auth, verdict, export).
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
The operator's category choice is a hypothesis, not truth (user, 2026-09-06): each wash
order with a vehicle read queues a package for a trusted reviewer over the private overlay
(Netbird); the verdict becomes the phase-B training label and the per-operator error rate.
wiki/concepts/vision-review-outbox.md.
- Boxes: the vision service returns the vehicle bbox; snapshot.ts stores the vehicle and
plate boxes on the read as FRACTIONS of the analysed frame (the stored snapshot is a
downscaled copy); vehicleForIdentity() returns them.
- carwash_review_outbox (migration 0031) + review-outbox.ts: crop = detector box + 8 %
margin, ≤ 640 px, plate blurred in place from the plate box; payload carries a
pseudonymous booth id and a keyed operator hash — no site name, no plate, no OSD, no
bystanders; multipart POST with a per-booth bearer; 2xx → sent (image dropped);
400/404/413/415/422 → abandoned; anything else → backoff 1 min·2^n capped 6 h; voided
orders and items older than 14 days abandoned unsent. Nothing queued while unconfigured.
- Enqueue is fire-and-forget off the intake path in createOrder; the loop runs every
CARWASH_REVIEW_INTERVAL_SEC (60) and stops on close.
- GET /api/carwash/review/status (site:read) + a "Remote review" line in Setup → Car wash.
- Env CARWASH_REVIEW_URL / _TOKEN / _BOOTH_ID (all three or off) documented in
.env.example and forwarded by compose.
- Tests: review-outbox.test.ts (crop + blur on a synthetic frame, config/pseudonyms,
queue/drain/backoff/abandon, through the app). Wiki: new concept page, index,
venue-modules As built, log. The collector is not built.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
Fills /analyze vehicle.body_type + confidence (car / motorcycle / bus / truck from COCO,
mapped to the shared vocabulary) for the Car Wash desk's category suggestion
(venue-modules.md §Vehicle category from vision). Advisory: the operator decides, a
confident downgrade is flagged, nothing is gated on it.
- vision_service/vehicle.py: pure numpy/cv2 letterbox (pad 114, raw BGR), stride-grid
decode, class-agnostic NMS, one vehicle per frame (the box holding the plate's centre,
else the largest); YoloxVehicleDetector on onnxruntime CPU, 2 intra-op threads.
- recognizer.py: WithVehicle composes the stage over any plate recognizer (stub included);
a failing stage yields vehicle=null + a "vehicle: …" note in /health.detail — never
costs the plate read. model_version reads "<plate>+yolox:yolox_s.onnx@640".
- settings: VISION_VEHICLE_MODEL_PATH (unset = off), _INPUT_SIZE (640), _MIN_CONFIDENCE
(0.4, the detector's floor; the flag threshold is site config).
- Dockerfile bakes yolox_s.onnx (best-effort curl at build; no network → stage off) and
sets the path; compose forwards it (empty = off); .env.example documents it.
- Measured on four real dev entry frames (DS-2CD1047G3H, 2560×1440): car at 0.83–0.88 in
~240–330 ms; empty lane with a person → none.
- tests/test_vehicle.py: decode/NMS/pick/letterbox on synthetic tensors, the composition,
and a missing-model /health. Wiki: opencv-anpr-service, venue-modules, log.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
The app plumbing for venue-modules.md §"Vehicle category from vision"; the model is the
open half (no bundled recognizer emits body_type yet, so the desk shows nothing until
phase A lands in the vision service).
- Shared: VEHICLE_CLASSES vocabulary, VehicleRead, CARWASH_VISION_THRESHOLD_DEFAULT,
reason code carwash.categoryDowngrade; settings/order/lookup views carry the read.
- Vision contract: /analyze vehicle.body_type + confidence (service schema); the Node
client normalises to the vocabulary and drops the rest.
- Record: snapshot.ts stores the read in the plate's device_events row (or its own when
the plate was unreadable); vehicleForIdentity() resolves it like the plate.
- Car wash: carwash_categories.vision_classes (site mapping "car, sedan → Vetura"),
carwash_config.vision_threshold (signed config_change when it moves), four vision
columns on orders — migration 0030. Lookup returns vision + suggestedCategoryId.
- Desk pre-selects the mapped category and shows the read + snapshot thumbnail; Setup
offers class chips per category and the threshold. Operator decides.
- Flag: a read at/above the threshold whose mapped category prices HIGHER than the chosen
one signs one `anomaly` (both categories/prices, operator, snapshot) and stores its id on
the order. Equal/upgrade/unsure/unmapped → nothing. Recorded only, never blocks, no
reason prompt (user, 2026-09-06).
Tests in carwash.test.ts; wiki venue-modules (As built), opencv-anpr-service, log.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
Closes the permissions-matrix loose ends (venue-modules.md §Permissions matrix):
- `role_jobs` (migration 0029): a role stores the manifest jobs it was composed from
(chips on at save + any bundle fully present). `jobById` / `jobsBehind` in
@parking/shared surface a followed job whose bundle grew past the role in a later
release; the roles list shows a "behind <job>" badge with a one-click "Update to job"
(the union, nothing removed) and the editor lints it. Never a runtime union: the grid
stays the explicit enforcement layer and an update never widens a role without a click.
- Every role create/update/delete appends a `config_change` (`role.<id>`, prev/value =
name + sorted permissions + jobs, operator); a no-op resave signs nothing. roleRoutes
now takes the ledger.
- booth-supervisor already carries subscription:*; the stale open note is closed.
Tests: routes/roles.test.ts. Wiki: venue-modules status, local-jwt-auth, log.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
Closes the three known follow-ups of the Tills decision (venue-modules.md):
- Activity log per till: `tillOfEvent(type, payload)` in @parking/shared (money events
by payload till, other events by their owning module's till, everything else booth),
applied by `/api/events?till=` in SQL and passed by the hub log, the Drawer "today"
panel and the booth feed (history + live pushes). The events route admits a role that
holds a module feed permission without event:read and returns only that module's
event types — the live-socket rule.
- Booth Z-report: `chargesByModuleMinor` sums the chargeLines on the till's payments by
module; the ticket bucket excludes them (Bileta = parking only); printed
"Lavazh (në biletë)" only when any was taken. The wash till's slip prints "Lavazh:".
- Printer role `wash-desk`: the wash till's Z-report and vouchers print there, falling
back to the booth printer; nothing falls back to the desk. `printerRoleOf()` is the
one reading of the role field (the entry/booth loaders treated any non-booth role as
an entry dispenser). Footer label "at wash desk".
Also: `GET /api/carwash/settings` opens to carwash:read OR site:read (new
requireAnyPermission) — the Wash operator job could not load the desk's category and
service pickers. Tests for all four; wiki (shift, printer-roles-failover, venue-modules,
log) updated.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
A site entitled to parking,carwash had the wash silently dropped as dependency-broken.
The validation program routes (compose/read) leave the validation module gate; the
merchant scan routes (mine/lookup/apply/void) stay behind it.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
The Komodo stack env alone is compose interpolation input; only variables in the
service's environment: block reach the container. Without it every booth on 55d6242
had Car Wash entitled (unset = every module).
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
Permissions matrix rethink (wiki/decisions/venue-modules.md §"Permissions matrix",
open-questions #16) — the grid stays the enforcement layer:
- Move 1: each desk's money is guarded by that desk's own permissions. Manifest
tillGuards {read, shift, cash}: booth = shift:read / shift:create / drawer:create
(unchanged), carwash = carwash:read / carwash:cash (new). Shift + drawer routes
resolve the guard FROM THE TILL (requireTill); a wash role holds no shift:* and cannot
touch the booth by construction. Replaces the session:read borrowing (tillPermission).
/api/shift/tills lists the role's readable tills with canWork; history/movements
without a till filter return the union of readable tills.
- Move 2: jobs — manifest permission bundles (booth-operator, booth-supervisor,
merchant, wash-operator) as one-click chips in Setup → Roles, with "mixes desks" and
"partial job" lints (warnings, never blocks).
- Move 3: the live WebSocket admits any watch permission (event/session/device read or
a module's feedPermission) and filters every push per role; report:read is the
reports screen only.
Auth: the token's roleId is only a hint — refreshRole() after every jwtVerify resolves
the user's CURRENT role (cached, bumped on role/user writes), so reassigning a user's
role applies on the next request and a deleted user's session ends with 401.
Tests: till guards + look-only role, feed rules, every job's permissions exist, role
reassignment without re-login. 353/353.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
Car Wash — the pilot venue module (wiki/decisions/venue-modules.md):
- Master data (categories × services price matrix) at /setup/carwash; the desk at /wash
(ticket lookup → order; open queue oldest-first: Done / Paid cash / Paid card / Void;
Finished list). Orders freeze names + price; their life is signed (carwash_order,
carwash_payment). Migration 0027.
- Where money is taken is a SITE setting (carwash_config.pay_at, migration 0028, signed
config_change on a flip) — no per-order radio; a stale client is refused (409).
- Core seams: PayStation charge providers (a booth-paid wash rides the parking payment as
chargeLines) + applyValidation() shared with the merchant route. A bay-paid, done wash
signs the $0 parking payment so the exit reader releases the car.
- "Parking discount" modes for the wash: free while the wash runs (+ tolerance) and wash
price off the fee (floored at 0), resolved at done and anchored at the order's intake
(the entry-anchored version comped a 74-day stay); typed-amount and percent hidden for
the wash. Long durations render y/d/h/m.
Tills — a shift belongs to a till, not the site (wiki/concepts/shift.md §Tills):
- TillId booth|carwash; every money event names its till (absent = booth, so the chain
re-folds identically). ShiftService is per till: single-open, folds, X/Z-reports,
vouchers, carry-forward. A bay payment needs the carwash shift.
- Working a till needs that till's module permission (manifest tillPermission; 403
till_forbidden); /api/shift/tills lists only the role's tills.
- Web: ShiftButton per till (header = booth, wash desk = carwash); shift hub lists every
open shift with till badges + filter; drawer hub switches tills.
Modules: landing per module (index route resolves booth → module landing → shifts →
profile); guards bounce to "/", /booth needs session:read.
Tests: carwash e2e suite (settings, intake, booth/bay paths, modes, void, gate, pay-at
policy, till permissions), 6 per-till shift tests; suite green (1 pre-existing flaky
backup test under the parallel run).
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
Groundwork for the Car Wash pilot (wiki/decisions/venue-modules.md, build-order
steps 1 + 3). No Car Wash code yet; validation is the first module behind the
seam, unchanged in behaviour.
- @parking/shared: MODULE_IDS, ModuleManifest, MODULES (parking required;
validation dependsOn parking), parseEntitledModules / resolveModuleActivation
/ effectiveModules as pure functions.
- DB: site_config.modules_json (migration 0026, hand-written + journal;
additive, nullable = everything entitled).
- Server: modules.ts (entitledModules from MODULES_ENTITLED env, activated
from site_config, effective set, requireModule preHandler → 403
module_disabled); modules/index.ts registers folder-based modules by
iterating the registry (modules/validation); site-config GET exposes
modules/modulesEntitled/modulesActivated, PUT takes the full desired set,
enforces entitlement + dependency rules (400 with reason) and signs one
config_change per module that actually flips; /api/auth/me carries the
effective set; validation routes guarded requireModule → requirePermission.
- Web: lib/modules.ts + modules/{index,validation}; router.tsx spreads
WEB_MODULES into nav + route tree (validate route no longer named there);
Setup → Site "Modules" panel (required shown disabled, dependencies as
hints, server refusal shown verbatim); validation sections + programs fetch
gated on the module; App invalidates the router whenever the session
changes (route-context consumers only re-read on navigation — the nav was
stale after a flip, and after every other setUser too).
- Lavazh validation station retired (STATIONS = ["bar"]; rows untouched).
- Deploy: MODULES_ENTITLED=parking,validation explicit in both booth stacks;
documented in .env.example.
- Tests: modules.test.ts (7); suite 329/329; web build clean; Playwright
round-trip on /setup/site verified live.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
Records the 2026-09-04/05 design sessions on wiki/decisions/venue-modules.md:
manifest-registry module system (folder per module, always-migrated schema,
one ledger union with prefixed event types, relations only via manifest
dependsOn + ledger events), enablement as entitled ∩ activated (vendor-set
Komodo env, site-admin site-config toggle recorded as config_change; server
enforces with requireModule, web only hides; disabling never deletes),
Parking recast as one module on a venue POS/audit core, Car Wash as the
pilot (inside the parking, entry snapshot as identity, bay camera for the
unrecorded-wash anti-fraud signals, v1 scope + build order), and vision
vehicle category as an advisory anomaly flag. Name stays parking-system;
validation stays for the Bar, only the Lavazh station retires with Car Wash.
Open-questions #15, index, log.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
Decision (user, 2026-09-04) after the first successful self-update
(v0.1.6 → v0.1.7): a .deb update runs pkexec dpkg -i and asks for an admin
password the operator does not have — that prompt is the intended gate.
The AppImage was tried as the no-root path and aborts on the 26.04 booth
(bundled 24.04 glib/WebKitGTK vs host gvfs/Mesa: EGL_BAD_PARAMETER), and it
discards the distro-maintained WebKitGTK the platform decision rests on.
Passwordless polkit for dpkg is root for the operator — rejected.
- update.prompt (en + sq) now says the install needs the administrator
password.
- desktop-shell-tauri.md: decision, evidence, rejected alternatives, and the
deferred fleet-grade option (root systemd timer in the .deb, minisign-
verified, notify-only in-app).
- standing-decisions.md: ship the .deb; runtime backend; updates admin-only.
- appliance-provisioning.md: drop the stale "hardcoded to localhost" note.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
tauri-plugin-updater resolves the download target as {os}-{arch}-{installer}
first (linux-x86_64-deb — the bundler stamps the installer type into the
binary, verified with `strings` on a local .deb) and only then bare
linux-x86_64. Our manifest carried only the bare key, pointing at the
AppImage. A .deb install therefore downloaded the AppImage, verified its
signature, then failed install_deb()'s is_deb check with
InvalidUpdaterFormat — after the download, before any relaunch. This, not
version drift or swallowed errors, is why v0.1.0→v0.1.6 never self-updated.
latest.json now carries linux-x86_64-deb, linux-x86_64-rpm (when built) and
linux-x86_64 (AppImage), each with its own .sig. A .deb update ends in a
polkit password prompt (pkexec dpkg -i) — the intended admin gate on a
root-installed package. README + wiki updated; wiki also records the v0.1.6
LIVE field verification.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
The v0.1.4 Origin fix cleared only the first of two gates in /api/ws's
preHandler. The second, req.jwtVerify(), reads the HttpOnly cookie — which
tauri-plugin-websocket (a bare tungstenite client, no cookie jar) can never
send. Every desktop handshake 401'd and use-live-feed reconnected every 10s
(confirmed in the park-2 server log).
- routes/ws.ts: POST /api/ws/ticket (cookie + CSRF auth) mints a 30s,
single-use, in-memory ticket; the WS preHandler accepts it via an
x-ws-ticket header after the Origin check, then the same report:read
role check. Browser cookie path unchanged; JWT stays out of JS.
- platform-ws.ts: fetch a ticket before connect, send it with the Origin
header; connect failures now go through logClient (rate-limited).
- logger.ts: flush read the CSRF token from document.cookie, null on
desktop, so every desktop POST /api/logs 403'd and was dropped silently —
no desktop client log had ever reached app_logs. Stash moved to a
dependency-free lib/desktop-csrf.ts shared by api.ts and logger.ts.
- backend-config.ts: ConnectScreen probe uses the unauthenticated /health
(now also returns app: "parking-system") instead of accepting any 401.
- README: local-AppImage release gate — tauri dev runs at
http://localhost:5173, not tauri://localhost, so none of these
origin-dependent bugs reproduce there.
- wiki: new section + log entry; four citation corrections.
Requires the server image with this commit deployed before the new desktop
build connects (the ticket endpoint must exist).
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
The desktop shell is one generic .deb/.AppImage distributed via
mca/public_releases, not built per-booth, but the backend origin was baked
in at build time (VITE_API_BASE, hardcoded to http://127.0.0.1:3000) — the
same installer could never point at a different appliance without a
rebuild.
Adds ConnectScreen (shown before Login in Tauri when no backend is saved),
backed by tauri-plugin-store persisting the operator-entered URL across
restarts. CSP's connect-src tightens to 'self' only — all backend traffic
already routes through tauri-plugin-http/websocket, which run Rust-side
and are outside connect-src's reach anyway — and the real access boundary
moves to capabilities/default.json's http:default scope, wildcarded so an
operator-chosen host is actually reachable. Adds a "Change server" control
in Setup (desktop-only) to repoint an already-configured install.
While tracing the desktop auth path for this: tauri-plugin-http's fetch()
runs through Rust's reqwest, which keeps its own cookie jar separate from
the webview, so document.cookie on tauri://localhost never sees the
parking_csrf cookie the server sets (open upstream bug,
tauri-apps/tauri#13045/#11518). This means the desktop app has likely been
silently sending no CSRF header on every mutation since the shell was
first built — pre-existing, independent of this change. Fixed by having
sessionView() (routes/auth.ts) also echo the CSRF value in the login/me
JSON body; the desktop client stashes it in memory and echoes that instead
of reading document.cookie. assertCsrf() itself is untouched.
Verified end-to-end against a real LAN-bound dev server: login returns a
csrfToken matching the cookie, a mutation using the body-sourced token in
X-CSRF-Token succeeds (200), and the same mutation without it still
correctly 403s.
Nothing displayed which desktop build was actually installed — debugging
a stuck update meant inferring the current version backwards from the
update prompt's target version. Added DesktopVersionBadge (next to the
existing server-side VersionBadge) using @tauri-apps/api's getVersion(),
the real running app version baked in from tauri.conf.json. No-ops in a
browser. Exported inTauri() from origin.ts instead of redefining it again.
console.error/console.warn only forward to the server when the client log
level is debug/trace (default: info) — the earlier error-logging fix never
actually surfaced anything, and a real update failure produced zero logs
anywhere. desktop-updater.ts now calls logClient() directly, unconditionally,
plus download-progress events. Also documents the resource-sync-park-systems
branch misconfig (pointed at dev, Stacks are stage-tier) found while chasing
this — full writeup on fleet-deployment-komodo.md.
Login worked after the mixed-content fix, but the live feed 403'd silently:
tauri-plugin-websocket's connect() runs on Tauri's Rust side, not inside the
webview page, so it never auto-attaches Origin the way a browser WebSocket
would — routes/ws.ts's anti-CSWSH check rejects a missing Origin before
auth. platform-ws.ts now sets Origin: tauri://localhost explicitly.
Also fixes a second, independent gap the above alone wouldn't have caught:
komodo/resources.toml's booth Stacks had WS_ALLOWED_ORIGINS= empty in
production despite .env.example documenting it as required for desktop.
Needs a Komodo sync + redeploy to reach a live booth.
Fixing VITE_API_BASE got login to build a correct absolute URL, but it still
failed with WebKit's generic "Load failed" — WebKitGTK treats tauri://localhost
as a secure origin, so http://127.0.0.1:3000 (and ws://) from inside it is
blocked as mixed content, a WebKit limitation CSP's connect-src can't override.
Added tauri-plugin-http (genuine fetch() drop-in, wired via a new
platformFetch() in origin.ts, used by api.ts + logger.ts) and
tauri-plugin-websocket (not a drop-in — adapted behind a native-WebSocket-
shaped interface in the new platform-ws.ts so use-live-feed.ts needed no
changes). Both route through Tauri's Rust side instead of the webview's own
fetch/WebSocket. Capabilities scoped to 127.0.0.1:3000/localhost:3000, matching
the existing CSP allowlist.
v0.1.1 was tagged but tauri.conf.json's own "version" field (what Tauri
bakes into the bundle filename/internal version) stayed at 0.1.0 — the
signed binary didn't match what latest.json claimed to describe, so every
update download failed signature verification. desktop-updater.ts's single
catch{} swallowed that identically to "offline", so it looked like nothing
happened at all. release.yml now syncs tauri.conf.json's version from the
git tag before building; the updater now logs a real post-accept failure
instead of silently reverting.
apps/web/.env.production's VITE_API_BASE went empty in 96fd97e to fix the
booth/browser same-origin case, but the desktop build shares that file and
was never given its own override — login broke with WebKitGTK's "The
string did not match the expected pattern." (a relative fetch() URL with
no base, from tauri://localhost). beforeBuildCommand now sets
VITE_API_BASE=http://127.0.0.1:3000 inline for the desktop build only;
verified both builds independently produce the right output.
The updater endpoint pointed at mca/parking_solution's own Gitea "latest
release" redirect, but that repo is private and field appliances have no
Gitea credentials — every update check was silently failing. release.yml
now mirrors signed installers to mca/public_releases (public, installers
only) under a fixed desktop-latest tag; tauri.conf.json points there.
Rejected embedding a read token in the app instead, given the booth-operator
threat model.
Also: make the appliance-provisioning root_directory gotcha impossible to
skim past (boxed callout + explicit next-step pointers), after it caused a
second missed step on the park-2 install.
park-lab-old referenced a server removed from Komodo, breaking the resource
sync. Also documents two Periphery incidents from this session: a Core-UI
rename doesn't touch the agent's own connect_as, and upgrading Periphery is
a config-preserving re-run of the installer.
Printer investigation (park-buzi): cover-open on the USB thermal
printer wedges its status offline/faulty, surviving a full reboot,
recoverable only via `docker restart server`. Traced sendRawUsb/
probeUsb end-to-end — no persistent handle in the app layer, so the
leading theory is the container's /dev/usb directory bind-mount
retaining a stale view across the printer's physical re-enumeration.
Not yet confirmed on hardware; documented with repro/confirmation
commands and ranked candidate fixes.
Also registers a new lab bench box, "art-docker-station", as a Komodo
Stack (dev tier, same shape as park-lab, its own isolated secret refs).
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
BackupService tracked last-success/last-error as plain in-process fields
and scheduled the daily backup via setInterval measured from process
start — so any server restart (deploy/crash/OOM/reboot, routine under
`restart: always`) silently reset the admin UI to "last successful
backup: Never" and drifted the actual cadence, independent of whether
backups were writing correctly to disk (they were — a real field
incident at park-buzi showed 7 valid rotating backups on disk with the
status stuck on "Never").
Persist last-success/error to new site_config columns (migration 0025)
and add BackupService.isDue(), computed from the persisted timestamp
instead of process uptime; server.ts now polls every 15 min and lets
isDue() gate the actual run. No API/UI contract change.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
Full live investigation of the persistent 503 "deviceBusy" on main-stream ISAPI
snapshots (10.0.10.13): ruled out config (byte-identical to a working sibling
model), ruled out firmware age (reproduced on both the original V5.8.11 and
current V5.11.0 builds, ~15 months apart), and ruled out real resource
contention (a full channel-ID sweep shows every ID fails identically except
the one hardcoded working value, including nonexistent channels) — pointing
at a broken/incomplete ISAPI snapshot handler that mislabels itself as
"busy," not a real encoder ceiling.
RTSP main-stream frame-grab was confirmed as a working route around it, but
given the bug and the sub-stream's real-world plate-read accuracy problems,
the owner decided to replace the DS-2CD1047G3H-LIU units rather than carry
an ffmpeg/RTSP dependency to work around vendor firmware. Ingested the
vendor datasheet as a source page along the way.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
A user whose role has only validation:create (the bar/lavazh validator) made
the shell misbehave: useLiveFeed() connected /api/ws unconditionally, the
server's report:read guard 403'd the upgrade, and the capped-backoff
reconnect hammered it forever — a 403 in the server log every few seconds.
Gate the socket on report:read (mirrors routes/ws.ts WATCH_PERMISSION) and
render StatusDot / ShiftButton / DeviceFooter only with their backing
permissions (report:read / shift:read / device:read), so a merchant's shell
is just the nav + their /validate screen, with zero doomed requests.
Claude-Session: https://claude.ai/code/session_01YYkpEsLmoQPaize5ec3oUm
validation-discounts: driving cases → the settled validation-only model (all
money/paper at the booth) → setup UX/storage/RBAC → full as-built record.
DECIDED: merchant stations scan with a USB/HID barcode scanner on the
web/desktop app (hand-keying + Luhn as fallback); POSTPONED with analysis:
web getUserMedia scanning (secure-context TLS prerequisite on the LAN +
Code128-via-camera weakness → QR-on-ticket first) and a Tauri v2 Android
merchant app (native ML Kit scanning; Android build/sideload overhead +
configurable-server-URL prerequisite). Also: wsl-dev-networking gains the
mirrored-mode gotcha where a Windows-side listener makes a port EADDRINUSE
inside WSL while invisible to ss — Vite auto-increments and tauri dev's fixed
devUrl waits on the wrong port.
Claude-Session: https://claude.ai/code/session_01YYkpEsLmoQPaize5ec3oUm
Multi-tenant SaaS layered on the offline model: link-up monitoring of the
signed ledger, device status, financials; one admin → many sites; per-site
secret custody; recurring fee. Records the four tensions, the confirmed
secrets boundary (sync creds + device-password escrow + app identity, NOT
the signing key), and the two in-discussion corrections that stand (NetBird
already solves booth isolation; remote barrier-open is pulseOpen-and-signed,
driven by the unmanned future). status: open, postponed.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
rongta-printer still named the cashino driver id (→ escpos + migration
0023 note); tariff-time-tiers listed the composer price preview as
deferred (→ delivered by the lab fee breakdown); tariff.md lab section
gained the breakdown + composer increment-guard paragraph; i18n.md now
records the "25 Qer 14:30" date standard + never-toLocaleString-for-
dates rule; fleet-deployment-komodo gained the park-lab stack + tier
table (the park-lab addition had also slipped the log — both fixed).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
park-buzi field observation: after a power cut the Hikvision cameras
reboot at the 1970 epoch (no/dead RTC battery, no NTP) and stay there
until a human logs into the web UI (which silently pushes the browser
clock) — corrupting the snapshot OSD timestamps (the evidence trail) and
ANPR push times meanwhile.
The host is the site's time authority (offline-first, no NTP infra):
- Device monitor triggers a sync at each camera's offline→ready edge —
exactly the power-restored moment — plus a 24h backstop; the attempt
is stamped before the async call so a failing camera retries at
backstop cadence, never every poll.
- HikvisionCamera.syncClock: GET /ISAPI/System/time; drift ≤60s → leave
alone; beyond (or unparseable = infinite drift) → PUT timeMode=manual
with the site wall-clock now WITH explicit utc offset
(localIsoWithOffset), echoing the camera's timeZone verbatim — correct
the clock, never fight its tz/DST config.
- Jumps >1h (the power-cut signature) log warn (persisted to app_logs);
small corrections info. Capability-guarded (isClockSyncable) —
hikvision only; dahua's CGI has no such endpoint.
- http-digest generalised to digestRequest (GET/PUT/POST + body); the
handshake was already method-aware. digestGet delegates unchanged.
8 new tests: in-sync no-op, 1970 PUT shape (manual + host instant +
echoed tz), unparseable→sync, failed-set surfaces, dahua non-capability,
DST-both-sides pins on the offset formatter.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The kernel numbers usblp nodes by plug/boot order (park-buzi's printer
is lp1); the wizard hardcoded lp0 in labels/default and the admin had to
shell in and `ls /dev/usb`. Now:
- GET /api/setup/usb-printers enumerates /dev/usb/lpN (visible via the
compose bind-mount) and enriches each with the printer's self-reported
make/model from sysfs ieee1284_id (readable through Docker's ro /sys).
- The wizard's devicePath becomes a SELECT of printers actually present
("/dev/usb/lp1 — Xprinter XP-K200L"): a fresh form preselects the
first real device; a saved-but-unplugged path stays selectable,
flagged "saved — not present now"; zero found falls back to free text
+ a check-the-cable hint.
- Transport option label no longer hardcodes lp0.
Wiki: printer-usb-transport marked HARDWARE-VERIFIED (lab 2026-07-07:
full slip + feed + cut over USB — parity with TCP).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
The chunked-write fix (81bc2e3) still truncated on hardware: the lab
test slip stopped mid-sentence with no feed and no cut (text hidden
until the feed button). Verified against drivers/usb/class/usblp.c:
- write() returns at URB SUBMISSION, not completion;
- only ONE write URB is in flight (the next write EAGAINs until it
completes);
- usblp_release() — our close() — KILLS in-flight URBs.
The printer drains bulk data at PRINT speed (tiny internal buffer on
these clones), so closing right after the last accepted write cancels
the still-transferring tail — exactly where the feed + GS V cut bytes
live. Kernel-accepted ≠ printer-received.
Fix: the one-URB rule makes acceptance of write N a completion
certificate for write N−1. writeAllUsb now writes the payload's FINAL
BYTE alone — its acceptance proves everything before it is physically
in the printer — then drains 300 ms for that single packet before the
caller closes. New test pins the final-byte-alone chunking; wiki
printer-usb-transport.md carries the kernel-level account.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Second half of the printer/relay decoupling: the category section's
add-button gate ("add a controller first — a printer points at one of
its relays") blocked every non-access category while zero controllers
existed — hit on the lab bench (USB printer test, no relays on hand).
Printers don't bind (role + failoverRank route jobs), so the gate now
exempts them like the form's requirement already does.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
julian