The park-buzi printer is a K200L (Xprinter/ICS XP-K200L; its LAN board and USB
descriptor call it "POS-80"). Its board serves the Rongta's five-row status table
under /prt_status.htm — but the reply carries no HTTP status line or headers, which
node:http rejects, so the Rongta driver could never read it and the unit was filed
in July as "no status page → generic driver" (reachability only).
New `k200l` driver (printer-k200l.ts): prints through the generic ESC/POS device
(same bytes, TCP 9100 or usblp) and reads the page over a raw socket, tolerant of
both the headerless and a proper HTTP reply. Mapping mirrors the Rongta: board
unreachable → offline; page not understood → degraded, never ready; any fault →
degraded naming it; USB → reachability floor. The Rongta driver is untouched.
Tests replay the captured headerless page (devices suite 76). Live against the
lab unit: ready; with the cover open the board reports cover open, paper out,
off-line.
Wiki: new k200l-printer entity (names, network setup from factory
192.168.123.100, board quirks, status page, what it means for park-buzi — over
USB the app never saw cover/paper state at all), cross-links on the Rongta,
status-monitoring, USB-transport and WSL-networking pages (parking-net pinned to
eth1 while the LAN NIC is eth0), index.
Claude-Session: https://claude.ai/code/session_01FWncR69HgGPuei1dLrW3cU
The Cashino 80mm printer reported wrong status: it ran on the `rongta`
driver, whose readStatus() scrapes the Rongta board's /prn_stat.htm status
page — which the Cashino does not serve — yielding a bogus degraded/page-
error verdict while the printer was online and printing fine. Root cause:
the Cashino is an ESC/POS PRINT clone with no trustworthy STATUS mechanism.
Fix: extract the shared ESC/POS rendering + transport (renderTicket/
renderReport/renderSubscriptionCard/sendRaw/probe + CP852 map + code128/
qrCode) from printer-rongta into drivers/printer-escpos.ts, and add a
dedicated `cashino` driver that reuses that print path but is deliberately
NOT MonitorableDevice (no readStatus). isMonitorable() is then false, so the
device monitor falls back to healthCheck() — a plain TCP reachability ping:
reachable -> ready, unreachable -> offline, never a guessed paper/cover
state it cannot sense. Rongta driver unchanged (still scrapes its page,
still monitorable). Register + re-export cashinoDriver.
Verified at runtime (cashino registered, isMonitorable=false, no readStatus,
healthCheck->offline on unreachable) and live: /api/devices/status shows both
printers ready (lane via ping, booth via page). The live entry-dispenser at
10.0.10.9 was switched rongta->cashino in the operator DB (backed up).
Also fix the Albanian device-role chip wording, which read wrong as a
"{category} {role}" label: access mixed "i përzier" -> "hyrje/dalje"
(it means a barrier spanning both directions); printer lane "korsia" ->
"në korsi"; booth "kabina" -> "në kabinë". English tidied to match
(mixed->entry/exit, lane->at lane, booth->at booth).
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
Generalise printer-only monitoring to every configured device. New
DeviceMonitor polls all enabled devices each tick (default 8s): printers
via rich readStatus(), relays/readers/cameras via the generic healthCheck()
reachability probe, flattened to one traffic-light (ready/degraded/offline)
+ detail, deduped (emit on change only), fail-toward-offline.
- device-status bus event + GET /api/devices/status snapshot.
- Pushed over the existing /api/ws (hello carries the initial set;
device-status frame per change).
- Web: live-store devices map, WS handler, DeviceFooter chip-per-device
(role label not vendor; click a degraded/offline chip for an issues panel).
Verified roleKind resolution + change-only emit on a fresh DB.
Note: the footer's UI surface (api type, router mount, i18n devices) rides
in the subsequent subscription commit due to shared-file overlap.
Claude-Session: https://claude.ai/code/session_01Xcm6ikLgGoCxxHrxtjkk5V
A parking lot is one pool of spaces with a flexible set of entry/exit
points — no "lane". Direction is a property of each RELAY inside an access
controller; readers/cameras bind to a controller relay and inherit it.
Schema:
- drop `lane` from ledger_events, device_events, sessions
- rename lane_devices -> devices (no lane/direction columns)
- access config.relays=[{relay,direction,button?}]; reader/camera
config.controllerId+relay binding
- fresh 0000_baseline migration (history reset; dev data was throwaway)
Signed ledger:
- remove `lane` from canonicalize(); bump signer keyId sw-hmac-v1 -> v2
(v1 events won't verify under v2 — intentional, gated per-event by keyId)
Server:
- new device-resolve.ts (replaces lane-map.ts): relayForButton,
relayForDevice, firstRelayByDirection, devicesByDirection
- entry-flow: button terminal -> its relay; exit/permit: reader's bound
relay; dispatcher resolves the bound relay + inherited direction
- camera snapshots fire by direction site-wide, async, never block open
- DeviceConfig widened to nested JSON for relays[]
Web:
- wizard: no lane selector; add controllers (relay map + entry-button
terminal) first, then bind readers/cameras/printers to a controller relay
Wiki: new entry-exit-points.md (replaces lane-direction); reworked
entry-exit-readers, parking-session, first-run-setup, device-registry,
append-only-event-chain, device-events; removed stale lane/LaneMap mentions.
Add the rongta PrinterDevice driver (ESC/POS over raw TCP 9100) and the
device-agnostic pieces around it:
- Roles + failover: each printer declares a role (entry-dispenser/booth-
receipt) and failoverRank; printer-routing.ts picks the best healthy printer
and falls back outside->booth for entry tickets (never the reverse).
- Live status: MonitorableDevice.readStatus()/PrinterStatus capability. The
Rongta driver scrapes the device's own /prn_stat.htm (Cover/Cutter/Paper
End/Near End/Off-Line) rather than hand-decoding DLE EOT, whose reply bytes
on this clone don't match the canonical ESC/POS bit layout (verified on
hardware) -- avoids a false-healthy. Maps to ready/degraded/offline, fail
safe on an unreachable or unexpected page.
- Server PrinterMonitor polls enabled printers (PRINTER_POLL_MS, default 5s),
caches latest, emits "printer-status" on change. Exposed via
GET /api/printers/status and an SSE stream for the booth UI.
Verified against 10.0.10.6: ready when healthy, offline when unreachable
(no throw), bus emits on change and suppresses unchanged reads.
Wiki: new rongta-printer entity, printer-roles-failover and
printer-status-monitoring concepts; BOM/index/log updated.
julian