parking_solution/wiki/entities/gee-qr-er80.md

type, tags, sources, updated, status

type	tags	sources	updated	status
entity	parking hardware readers qr	gee-qr-er80	2026-06-16	open

GEE-QR-ER80 (QR access reader)

The project's QR-code reader (GEE NFC LIMITED). A static optical scanner for QR / DataMatrix / 1D barcode, optional ID/IC card. This is the ticket-encoding scanner the design called for — read at the pay station and exit lane — and a path for QR permit credentials. On hand: variant -Q-W (QR scanner; Wiegand/RS-232/RS-485). (See gee-qr-er80 / raw/.)

What it is (and isn't)

• Optical, not RFID-prox. Earlier we assumed "ER80-EM" = a 125 kHz EM4100 card reader — the datasheet corrects that: it's a QR/barcode scanner. The -EM in the original label was a mis-id; the real model is GEE-QR-ER80. Optional D/C variants add ID/IC card, but the unit on hand is QR-only (-Q).
• Multi-interface (Wiegand 26/34, RS-232, RS-485, USB, TCP/IP); the -W variant exposes Wiegand + RS-232/RS-485.

How it integrates — HTTP-GET push, server replies the verdict (confirmed via SDK)

The protocol is settled by the qrcode-sdk (not serial as first guessed). The reader is configured (Windows tool QRCode_v1_6_5.exe) with a server IP/port and a "server language" (only picks the URL path, e.g. /qa/mcardsea.php). On each scan it HTTP-GETs the host:

GET /qa/mcardsea.php?cardid=<QR>&mjihao=<devId>&cjihao=<devSN>&status=<2 chars>&time=<utc>

cardid = scanned data; status low digit = direction (1=in / 0=out). The host replies JSON {data:[{cardid,cjihao,mjihao,status,time,output}],code:0} where reply status 1=valid (beep 2×) / 0=invalid (beep 1×), output 0=Access/1=WG26/2=WG34, time syncs the clock.

This is host-in-the-loop and SYNCHRONOUS: the GET is the access query and our reply is the decision — it drives the reader's beep + output. So unlike a fire-and-forget reader, the endpoint must decide (valid/invalid, direction from status) and reply, then also emit a DeviceReadEvent on the read bus for the entry/exit/permit flows (parking-session, permit) to open the barrier. (device-input-flow is the analogous push pattern; this one also returns a verdict.)

This explains the "no beep": feedback comes from the server's JSON reply, not locally. A non-JSON / missing reply ⇒ no beep even though the scan worked. So "no beep" ≠ "didn't scan."

• Pushes over plain HTTP to our 10.0.10.x host (on the device subnet); no serial wiring, no Wiegand-decode hardware. Suits the host-in-the-loop model; autonomy is moot anyway (dingtian-relay has no onboard ACL).
• Linux-supported, 4–15 VDC, default IP 192.168.1.99 — fits the disk-os-hardening.

Resolved (2026-06-16)

• Protocol = HTTP GET poll + JSON verdict (above). The earlier "serial/Wiegand, find the baud" open questions are moot — it's HTTP. Wiegand is the reader's output line on a valid read (the reply output field), not the host transport.

As-built (2026-06-16)

• Endpoint GET/POST /qa/mcardsea.php (apps/server/src/routes/qr-reader.ts, public — the reader has no auth, sits on the device subnet). Parses cardid/mjihao/cjihao/status/time, runs the scan through the read dispatcher (permit match → permit flow; else transient exit), and replies the SDK verdict: status 1=valid(beep 2×)/0=invalid(beep 1×), output 0, time.
• The read flows were refactored to return a ReadOutcome { accepted, direction, reason } so the endpoint's reply reflects the real accept/reject (the dispatcher decides AND opens the barrier via the flows). A fire-and-forget reader ignores the outcome.
• Lane mapping: the endpoint keys the reader's lane_devices id off the device serial (cjihao) for now — so assign the reader with lane_devices.id = <serial>. Refine when the setup wizard models the reader's server-side identity properly.
• Verified via inject: valid permit QR → status:1 + open; re-scan → permit exit (still valid); unknown QR → status:0; reader on a barrier-less lane → status:0.

Verified on hardware (2026-06-16)

Captured a real scan (vendor-emulator logger on :3000). The reader does scan, send, and beep — the earlier "no beep" was simply that no server was answering on :3000 with valid JSON. Real GET:

GET /qa/mcardsea.jsp?cardid=52020056&mjihao=1&cjihao=H05M2AFA&status=11&time=1781634494
from 10.0.10.7   (referer: http://www.fondvision.com — the OEM is Fondvision)

• PATH carries the configured "server language" EXTENSION: this unit is set to JSP, so it GETs /qa/mcardsea.jsp — NOT .php. Our endpoint was registered at .php only → it would have 404'd the real reader. Fixed: the route now registers php/jsp/asp/aspx/cgi.
• cjihao = H05M2AFA is the device serial — the value our endpoint keys the lane on. So assign the reader with lane_devices.id = "H05M2AFA" (+ an access device on the same lane).
• mjihao = 1 (device id). cardid = the scanned barcode (52020056). status=11.
• The reader beeped on the vendor reply with status:0 — so it acts on the reply; 0 = invalid/1-beep as documented. A matching permit/session will return status:1 → 2-beep accept.

Assignment (as-built 2026-06-16)

A dedicated gee-qr-reader driver (device-registry, reader category) models the push reader: its one config field is serial (the cjihao the device reports). The admin assigns it in the first-run-setup like any device (normal UUID row id) and enters the serial. The QR endpoint resolves the lane by matching config.serial to the scan's cjihao — not by row id — so no DB hand-editing. Set the reader's server IP/port to this host in the vendor tool; assign + enter its serial here.

• Verified via inject: assign gee-qr-reader {serial:"H05M2AFA"} on a lane w/ an access device → a .jsp scan with that serial + a matching permit QR → status:1 (2-beep accept) + open; re-scan → permit exit; unknown card → status:0; unassigned serial → status:0 (no lane, graceful).
• Note tcpip-reader is the WRONG model for this device (host-connects-out, a stub) — use gee-qr-reader.

Open / next

• Re-test on hardware against the real app (now .jsp-aware + serial-resolved): scan → expect a status:1 2-beep when the QR matches a permit/open session.
• output is replied as 0 (Access). Confirm on hardware whether the reader needs 1/2 (WG26/34) to drive its access line, vs. 0.